My DreamBox is dead . Pleas help .

[qnd_nz]

Dear Friends .
Today I applied new Image 4.3.1 in my Dreambox 500S and after few minutes I faced a message in my TV Screen (( warning -clone box detected - system stop contact your dealer - adios amigo! )) and My DreamBox is dead now please help me to repair my DreamBox .

[satman]

Dear Friends .
Today I applied new Image 4.3.1 in my Dreambox 500S and after few minutes I faced a message in my TV Screen (( warning -clone box detected - system stop contact your dealer - adios amigo! )) and My DreamBox is dead now please help me to repair my DreamBox .

Jtag the only way you could recover it,,,,,,, and even that wont work every time i am afraid,, you have a clone box and used a gemini clone bomb image

[qnd_nz]

Dear friend thanx for your quick reply . I'm new here and also i don't know how to Jtag . can you tell me how to Jtag with more details .

[krazylegz]

the search button is a wonderful tool m8

look here bud

How to JTAG a DM500

[qnd_nz]

Thanks alot !

<--qnd_nz added 17 Minutes and 6 Seconds later...-->

the search button is a wonderful tool m8

look here bud

How to JTAG a DM500

Sorry Friend I want to ask one thing more . it is possible to Jtag Gemini 4.4 .

[krazylegz]

it doesnt matter what image is on your box as gemeni 4.3.1 has corrupted your bootloader on the box.

so try your luck and jtag it, keep your fingers crossed and if it works DO NOT put a gemeni image back on, dont know why people use gemeni anyway they're sh*t

(oh and ps use the thanks button to say thanks as you'll end up getting wrong for using a post to say it)

[qnd_nz]

Thanks for your all support . I jtag My DM500 and it is alive and I upgraded it with NabiloDM500-V08-MAXVAR . Once again thanks for your All Support .

[redhound]

the best thing to use on these boxes are pogo pins held in place with a pencil and bluetack on the jtag,that way there isnt any need to solder a box connection.although dvbseller seems to selling replacement boards now.

[meeee123]

the search button is a wonderful tool m8

look here bud

How to JTAG a DM500

am trying to fix my dm 500s but still nothing worked tell now
pleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee z
helppppppppppppppppppppppppppppppppppppppppppppppp p

[Curious123]

am trying to fix my dm 500s but still nothing worked tell now
pleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee z
helppppppppppppppppppppppppppppppppppppppppppppppp p

I think you might help yourself a lot more if posted something a bit more constructive than the above comments such as what you have tried so far and what results you have had.

[redhound]

the main thing to do is not rush in and make mistakes,its only software damaged,tmc sells jtags if you are not sure.this setup made out of header pins can save soldering to the board.

[sarikth]

Why I am not able to see the image ?

[rickets]

I suspect not enough posts. Think you might need 5 good informative posts first ;-)

[fafko]

I have the same problem please help!

[iacovides]

Get a new board from DVBseller for 40eu