missing channels

[richard_s]

i have a dm500. i have a fully paid for s*y card but i can only find some of the channels. i have tried to manualy scan in missing ones using details from lyngsat. where am i going wrong.
config is:-
kernal linux 2.6.9 release 0440
gemini
cccam 2.0.9

thanks

richard

[Devilfish]

Are you using a sky minidish or a motorised dish?

Missing channels usually means your dish is out of alignment.

[richard_s]

dish is a 1.2M fixed not getting sky news i am an installer allignment correct

[Devilfish]

Sky news is on 12207.00 V 27500 2/3.

Go into the motor setup page and choose these settings, see what the SNR % is like on that transponder.

[westkill]

do you have the option to do a manual or transponder scan for the missing channels
this should be for sky news
frequency>12208000
symbol rate>27502000
polarisation>vertical
inversion>off
fec>2/3

[laticsmon]

same problem

i have same problem on a clone 500 so got an eagl works a dream could be tuner fault