satelite fix

[ANALYSE_THIS]

hi all,

wondering if anyone can point me in the right direction. i have a dreambox 500s, ive flashed my box with nabilost darkstar 2 had no problems doing this ive even managed to install ccam 2.2.1.

i have a motorized dish and want to scan satellites now. this is where i am stuck gone into service searching checked sat config which is set to many satellites via disEqC rotor can see sat position,LNB, 22khz Hi/Lo,Voltage H/V. can see sats ive never herd of like Pana**** 9 (58.0W).

Motor config
Use gotoXX fuction is ticked
Longitude 0.000 East
Latitude 0.000 North
do these need to be changed

When i try scanning i can see that my motor sat isnt moving checked everything all wired up checked with my other box and it moves.

Any ideas how i can get my dish to work with my box.

Thanks

[Desitv]

Download satellites.xml generator / transponder .ini generator past to dm

[ANALYSE_THIS]

Download satellites.xml generator / transponder .ini generator past to dm

hiya ive downloaded the xml, ini file for sats i would like to recive. where next

[mcmlxviii]

Hi
You need to input your longitude and latitude into the settings.

[ANALYSE_THIS]

Hi
You need to input your longitude and latitude into the settings.

hi there i have found my long lat settings how do i put a - in using remote control thanks

[mcmlxviii]

You change the settings from east to west

[ANALYSE_THIS]

You change the settings from east to west

entered settings i can now drive the motor to 0

[mcmlxviii]

Dish should move when you select a channel to watch

[ANALYSE_THIS]

Dish should move when you select a channel to watch

dish now moves then the screen displays turning to 5.0 no channels. bbc 1 works

[mcmlxviii]

What is your SNR and AGC (can be found by pressing OK button on remote)