strange tuning problem dm800 clone

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • reddevil157
    DK Veteran
    • Jan 2010
    • 1427

    #16
    did you try the bouquets yet Andy ?
    sigpic

    Comment

    • southpaw
      V.I.P. Member
      • Dec 2009
      • 2233

      #17
      if you load a set of settings , sgt flipflop`s for instance

      then you wont be required to do a scan , may help as you only need to find the settings in tuner and away you go , as appose to pissing about in tuner and then scanning

      Comment

      • andy211081
        DK Veteran
        • May 2009
        • 575

        #18
        Originally posted by reddevil157
        did you try the bouquets yet Andy ?
        hi i have added the bougets but i get no video from anything on screen...is this where the c line stuff comes in?

        my cccam is 2.2.1
        Ladies and Gentlemen, this is your captain speaking. I have the only gun on board. Welcome to Con Air.

        Comment

        • andiewill
          DK Veteran
          • Aug 2008
          • 490

          #19
          Why dont you guys load Sgt flipflops bouquets and see if that locks on, and it will also save you time by not having to scan the box, and see if anything comes up with a working channle ? if not it might be a tuner issue....... ahhh already explained as i did not see the above post.
          Last edited by andiewill; 28 March, 2011, 19:30.

          ITgate TGM220 (swapable tuner), Dreambox 800 pro, Dreambox 500c x 2, DBox, Popbox media player.

          Comment

          • reddevil157
            DK Veteran
            • Jan 2010
            • 1427

            #20
            Would av thought you'd have the FTA channels at least ( without the line )
            sigpic

            Comment

            • andy211081
              DK Veteran
              • May 2009
              • 575

              #21
              i have added the bouquets but get nothing when i clcik on a channel, so i have given up for tonite and will try again tomorow
              Ladies and Gentlemen, this is your captain speaking. I have the only gun on board. Welcome to Con Air.

              Comment

              • IAmATeaf
                DK Veteran
                • Mar 2011
                • 591

                #22
                Originally posted by andy211081
                i have added the bouquets but get nothing when i clcik on a channel, so i have given up for tonite and will try again tomorow
                Not all the channels will clear, just the FTA ones so make sure you've set the channel to BBC1 or something similar that's free and clear.

                Comment

                • kristinn76
                  Newbie
                  • Mar 2011
                  • 17

                  #23
                  Originally posted by andiewill
                  Why dont you guys load Sgt flipflops bouquets and see if that locks on, and it will also save you time by not having to scan the box, and see if anything comes up with a working channle ? if not it might be a tuner issue....... ahhh already explained as i did not see the above post.
                  Am trying to figure this dreamboxedit program out, i have connected to the dreambox by ip and the link is ok. is there a tutorial on how to transfer boouquets to the box somewhere?

                  Comment

                  • Shady
                    Shite Link King
                    • Dec 2010
                    • 6404

                    #24
                    yep there is..trust me, ur doing everything right...one random time out of 100, dbedit will work as it should
                    Fave replies from various threads

                    1: What the fff is all that about??? All that crap below your reply I mean, get a life mate
                    2: no info on google abt the pace sv5 rang asda they have no idea what i was talking about,
                    3: Your total contribution to this forum, bordering on trolling, seems to have been a collection of snipes, one liners & asterisked expletives





                    Comment

                    • mdt
                      V.I.P. Member
                      • Feb 2009
                      • 3034

                      #25
                      i too have just sent my dm800hd tuner back to tony as mine was only picking up channels from 10.7 to 11.700 and even then it wouldnt display them or it would and there was a very load hissing noise over the picture/audio. these new tuners are supposed to be made in japan(ie quality) and be the dogs bollox but it seems there are alot of faults. according to tony the boxs are tested on cctv-5 before they are sent but something is definatley wrong. regards mdt
                      Last edited by mdt; 28 March, 2011, 22:32.
                      DM800HDSE SIM 2.10. SSL84D OPEN-ATV ORBITAL 80CM/DARK MOTOR/IBU/53E-30W

                      Comment

                      • reddevil157
                        DK Veteran
                        • Jan 2010
                        • 1427

                        #26
                        Originally posted by kristinn76
                        Am trying to figure this dreamboxedit program out, i have connected to the dreambox by ip and the link is ok. is there a tutorial on how to transfer boouquets to the box somewhere?
                        you got pm m8
                        sigpic

                        Comment

                        • garry1312
                          DK Veteran
                          • Oct 2010
                          • 2178

                          #27
                          in my opinion yaoxin is now supplying very poor quality, about a month back or so i purchased 5 500s from tina at yaoxin and 2 out of the 5 were not working. i also keep reading over and over again about people complaining about tuner issues with there 800hd's. glad i never purchased my 800 from them and would never make the mistake of purchasing anything from them again. maybe once they had a good name but all these recent complaints speak for themselves.


                          Rest In Peace Michael Mcharg, A true friend and although gone never forgotten. 11-10-08.

                          Comment

                          • mdt
                            V.I.P. Member
                            • Feb 2009
                            • 3034

                            #28
                            Originally posted by garry1312
                            in my opinion yaoxin is now supplying very poor quality, about a month back or so i purchased 5 500s from tina at yaoxin and 2 out of the 5 were not working. i also keep reading over and over again about people complaining about tuner issues with there 800hd's. glad i never purchased my 800 from them and would never make the mistake of purchasing anything from them again. maybe once they had a good name but all these recent complaints speak for themselves.

                            he,s got until friday to sort me out or im going to raise a complaint with PP. he has picked the wrong guy if he thinks he,s ripping me off as ill blacklist him on all the forums im active on which is quite a few. i find it funny that he hasnt replied to my last 2 emails either!! regards mdt
                            DM800HDSE SIM 2.10. SSL84D OPEN-ATV ORBITAL 80CM/DARK MOTOR/IBU/53E-30W

                            Comment

                            • andy211081
                              DK Veteran
                              • May 2009
                              • 575

                              #29
                              signal locks on fine now in satfinder but picks up no channels during scan

                              i have added channel listings now with dreamboxedit but have no picture on any channels even though the signal is still at 90%+

                              I have the pre-installed image on which i belive is gemi 5.1 but on the main screen it says enigma2 loading in the bottom left is this normal? shall i install a new image?
                              Ladies and Gentlemen, this is your captain speaking. I have the only gun on board. Welcome to Con Air.

                              Comment

                              • gordons
                                Newbie
                                • Nov 2010
                                • 14

                                #30
                                install a new image compatible with your box/bootloader. Had same problem, which was solved when I installed a new image patched for clones. Infact I couldnt even install cccam with preinstalled 5.1. I used nabilo black hole since, now will try newnigma2

                                Comment

                                Working...