driver for usb t dongle
Collapse
X
-
Here you go ryange, try this one.
Digital Kaos - Downloads - sim201-ssl82-dreamelite-PHOENIXedition2..13/05/201Comment
-
Am i right in thinking you can only use 1 tuner at one time?
- I have a DM 800 SE, DVB-S
If I buy a usb DVB-T tuner, I can only use 1 tuner at a time right?
Is it easy to switch tuners quickly?.. What I mean is, is it easy and quick to change from DVB-S to DVB-T?
I'd consider buying one (I have a standard aerial in my room, currently not connected to anything). But is it easy to use and switch forward and back from each tuner?
- Can someone explain simply how this works?
- Are there plugins available to make this (USB DVB-T) nice and easy to use?- Thanks to those who deserve them, and none to those who don't...
- DM 800 HD - Clone | DM 800 HD SE - Clone | Openbox S11
- weedman

Comment
-
I have re flashed with this Dream Elite phoenix addition. I now have all my sat channels working again. Now for the 2nd tuner part- When I down load the Avermedia |AverTV Volar version r16 file it downloads and sees the file but does not allow me to enable it (have also tried re boot dB800) The Italy file is not listed under the tuners . Any ideas I am following a guide How to: Dm800hd and USB dvb-t tuner on Dream etc..Here you go ryange, try this one.
Digital Kaos - Downloads - sim201-ssl82-dreamelite-PHOENIXedition2..13/05/201Comment
-
OK, the message I am getting after downloading the AverMedia file is "no supported devices found" so I am assuming either I have a bad DVBt tuner or something else is wrong. Is there any way of testing the USB tuner on a laptp to see if it can be seen as some type of USB device.I have re flashed with this Dream Elite phoenix addition. I now have all my sat channels working again. Now for the 2nd tuner part- When I down load the Avermedia |AverTV Volar version r16 file it downloads and sees the file but does not allow me to enable it (have also tried re boot dB800) The Italy file is not listed under the tuners . Any ideas I am following a guide How to: Dm800hd and USB dvb-t tuner on Dream etc..Comment
-
Should work mate, go back to post 8 and try a manual install.OK, the message I am getting after downloading the AverMedia file is "no supported devices found" so I am assuming either I have a bad DVBt tuner or something else is wrong. Is there any way of testing the USB tuner on a laptp to see if it can be seen as some type of USB device.
Is this the tuner you have.
Digital TV HDTV DVB-T USB Stick Dongle Tuner Recorder Receiver - BuyinCoins.comComment
-
Hi weedman,usb dvt tuners are handy to install, it's just a matter
of finding the right drivers for the model you have.
Once installed you enable the usb tuner in tuner configuration, scan for channels and all the terrestial channels will be in your channel list along side your sat. channels, no need to change tuners or anything like that.Hope this helps.
Cheers,
bugsy.Comment
-
Hi Bugsy, This is the same tuner I purchased. If I use tunistat addons I can download and see the file in the enable page but when I go to enable I get message no supported device available. I have plugged DVBt tuner into port on Laptop and it sees it as a tuner on the USB port. If I use Italyss to download the file it appears to download OK but when I go to the enable screen there is no file to enable same as I was getting before I re flashed.Should work mate, go back to post 8 and try a manual install.
Is this the tuner you have.
Digital TV HDTV DVB-T USB Stick Dongle Tuner Recorder Receiver - BuyinCoins.comComment
-
Hello guys, I have a DM800HD SE (clone) and i bought a Cinergy T Stick RC HD (propably MKII). Can someone explain me what do I have to do to make it work? Do I have to flash my DM with a new image? Do I have to install new plugins, and if yes, how? Excuse me for being a complete newby, a couple of links would be highly appreciated. I'm going to try manual install from step 8 for start...Comment
Comment