dm800se glitching

[alom5]

i finally have my dm800se and..................it's glitching on all channels not very frequently, but still glitching on fta channels be it hd or sd.

any ideas or have i just got lucky???

its a lot worse on hd.

[smirnoff_rules]

if its on freeview its a dish alignment problem

[MrFug]

What is your signal quality like? And BER levels? If it's not your lnb or signal strength, it sounds like a dodgy tuner.

[freck]

Goto satfind in your menu and check your SNR and AGC readings,they should be up around the 80+ mark and be stable.
Freck

[alom5]

excuse me as i'm using dm for the first time on motor setup.

had spiderbox and worked great.

ok. i'm thinking not tuner. i went on satfinder and ....snr at 43% agc at 7% ber is 0.

i was using disceq on spider.]

using usals with se.

how do i sort it boys.??

i got the blackhole 2 image on.....and i cant get cccam on it. so i'm gona change the flippin image.

so i wana get it sorted before i stick with the image i'm gona be using.

cheers lads.

[smirnoff_rules]

have u put your long and lat in the tuner settings

[alom5]

yep. put that in.

does it just need fine tuning.....how do i do that??

[smirnoff_rules]

u using basic or advanced settings in the tuner

[alom5]

advanced.

i set it up like in the sticky.

[smirnoff_rules]

try bacic m8 it still saves your advanced setting u can just go back if it dosnt work . and u have your north and west right too ?

[alom5]

same mate.

gona have to fine tune the sat i think as i'm getting signal but not as strng as it should. it used to be around s 98% q 98% on the spider on most sats.

[gji25]

best way to check your tuner is to set it up on a single satellite eg: sky uk 28.2e and set the tuner mode to simple/single satellite. set your dish up to point to 28.2e. then go to sat setup and check signal strength and ber. then you can setup using usals once your happy that the tuner is ok