CAN ANY ONE HELP PLEASE

[satman44]

ive just got my derambox 800hd pvr clone ive got dcc working comp box router all conected box conected to internet ip address netmask gateway primary dns ok secondary dns ok network ok and network wizard says internet ok where do i put a ccline ive triead dcc ftp etc ccam cfg right click edit copyed paste saved rebooted box nothing datei edit is empty apart from my c cline looking at the tuts it should have a lot of info iam i doing something wrong i am useing gemini enigma 2 ccam 2.21 its doing my head in can any one please help thanks

[Fergal]

Have you chose CCcam and started it via the blue button menu
you only need your sealion in the cfg nothing else
try cam 2.14 instead

[satman44]

ive started ccam how do i instal lccam 2.14 2.21 was allready installed thanks

[andy211081]

have you tried a different image as i dont like the gemini images so i always change my boxes

[smoggie]

try uninstalling your cfg file and then download it again throught the download menu.remove # at line 80 and paste in cline, then save n exit

[satman44]

how do i find down load menu just learning thanks

[alom5]

2.2.1 is fine mate don't need to download different one.

you must make sure you have the sealion in the right place.

right click cccam.cfg choose edit.

it will open file in notepad.

there will be a lot of writing.

go to the section where it has #C: serveraddress 12000 user1 pass1# and so on. add a couple of line breaks before #C: so you know where you are.

enter your sealion in the space. save file.

now make sure the box is using cccam and is active.

you can restart box to be extra safe. but it should all be working........as long as your sealion has is alive.

[satman44]

when i right click cccam.cfg is empty thanks

[Fergal]

2.2.1 is fine mate don't need to download different one.

you must make sure you have the sealion in the right place.

The cfg only needs the sealion in you can delete everything else in it

@satman have you port forwarded the port in the sealion on your router

[satman44]

not sure what you mean

[alom5]

isn't port forwarding only needed if you running a server?

[satman44]

any one in the warrington area that can help please

[alom5]

you need to have your line in the cccam.cfg file mate. if it's empty....you got nothing in there.

right click edit.....then when file opens. copy the line that was given to you and then save.

[satman44]

done that m8 but nothing

[Fergal]

So when you open the cccam.cfg file in etc your sealion is in there?
have you chosen the cam via the blue button menu and started it then reboot the box and check both see if they have saved and if it still wont work try installing cccam 2.14.