How to setup Diseqc with dreambox 800hd pvr

[chaves]

Hi ,I am new here. I have dreambox 800hd pvr clone. Can anyone tell me how to setup using Diseqc. I am using a multiblock with 3 lnb . LNB 1 is 19e,lnb 2 is 13e, lnb3 is 0.8w
and lnb 4 is 28e they are connected with diseqc .I have been reading the forum,but I couldn't find .I am confused.
Thanks for any help

[chaves]

Hi ,I am new here. I have dreambox 800hd pvr clone. Can anyone tell me how to setup using Diseqc. I am using a multiblock with 3 lnb . LNB 1 is 19e,lnb 2 is 13e, lnb3 is 0.8w
and lnb 4 is 28e they are connected with diseqc .I have been reading the forum,but I couldn't find .I am confused.
Thanks for any help

I forgot to say the image installed is Blackhole dreamElite 1.33d v3 sim 2.01

[reddevil157]

Try the simple config first in tuner set up
A = 28.2e
B = 19.2e
C = 13e
D = 0.8w
and make sure you don't have power to the box when you connect the switch, have heard of loads of ppl, messing up their switch this way.

[reddevil157]

Try the advanced config as follows: set the diseqc mode to 1.0
This worked for me.Don't forget to disconnect the power. Set lnb's as follows :

lnb 1 = 28.2e, committed diseqc command to AA
lnb 2 = 19.2e, committed diseqc command to AB
lnb 3 = 13E , committed diseqc command to BA
lnb 4 = 0.8W , committed diseqc command to BB