R01: No CA error found. on se

[garry1312]

getting a new laptop in 5/6 weeks, but he's not patient enough to just plug in DM800 til then

Wait until 5-6 weeks! its my new gadget it needs to be up and running it needs me to arse about way it

[alom5]

did the drivers install successfully?

[ChelseaBun]

you might aswell be patient, cause you just shout at it :P

[garry1312]

yep mate said they installed then still nothing, clicked on dreamboxse in device management and shows as having no drivers installed

[alom5]

ok. try these drivers.

should be sorted after these install and it picks up the se.

[satsmo]

Try these for the USB driver, they work as I use them. Unpack them first and then follow the installer.

Sorry I just seen the post above, these ones work as said.

[alom5]

yeah. i think they must be the same ones.

i used them a while back and weren't sure which ones worked.

[garry1312]

thanks guys, tried to download both but neither seem to download from opera or firefox :/ Will try with internet explorer.

[garry1312]

Thank you guys again much appreciated made connection with the receiver

It has been awhile since I have been really stuck and came on here asking for help, but tonight just reminds me theres a great bunch on here always willing to help

[alom5]

glad you sorted now.

just remember not to flash original images,.....that's done me many a time.

also when you flash the new image ...DO NOT REBOOT FROM THE WEB BROWSER. just close the browser and reboot the box.

[DMBoot]

First you need a USB-A To mini-usb-B to connect to service socket on back of receiver, and a Network cable to Connect Receiver to PC. PS3 Control Charger has the same lead.



Download

1 Sunray -Flashup for 800hdse



2 -- Because sometimes a patched image will not do the trick, i did chose for this manual the factory loaded image and the correct SSL82 for this box


1--- Connect USB cable to service slot on DM800SE/DM500HD and USB slot on Pc. Windows will then install the driver

You will notice, windows created a virtual Com Port connection to be be used ( in this case Com Port 4)


2 --- Switch Receiver off and connect Network cable Receiver and Router

3 --- Then Start SunRay- FlashUp, Tick Use Network, Fill the relevant boxes with local pc IP and Romote ip of your choose and click Connect.

Program will ask for you to Switch on the receiver.

4 -- It will then go into HTTP mode

5 -- At this stage, you open your browser and insert the romote IP shown on the 800LCD

Page will open as per bellow and then you chose the option Update Firmware.

6 --- Click Browse and navigate to your image

7 --- Chose the image and click Open

8 --- Now click Flash button

9 --- Image will start to

10 --- When it finishes you can click the back button of your browser so we can then send in the bl82 do not reboot

11 Browse and select the SSL82 for your DM800SE Clone

12 --- Once again Click Flash


13 -- After finishing click Reboot. In Most case you will need to do so manually



Box will then reboot and come back to life with image we chose to load. Then you can load your Patched image of your coice as box is functional again

Managed to screw up my DM 800HD SE clone that arrived this afternoon.

I'm up to part 11 having installed the Sat4fun-newnigma2_DM800SE-Sim2_ssl84 image.

Where do I find bl82/ssl82??

[DMBoot]

Installed Newnigma2-dm800se-3.2.2v2-sim210 using the above method and skipped stages 11-13.

Back working again - I think?

[DMBoot]

OK, trying to understand where I went wrong.

Box came with Enigma2 pre-installed. All was going well until I clicked to do some sort of software upgrade. I can't remember the screen, but I think the box told me updates where available. After, the box would not restart.

With my box being a clone, does that mean that I should not auto update the software. Does the box go to the web and download updates from the site (Enigma2 website??) and the site assumes the requesting box is an original Dreambox?

I'm asking as I want to avoid further screw ups.

[kuba1999]

I do have a vista pc. When connecting usb to DM asking for drivers (actually cd of DM800se). thanks for help.

[helgeaars]

Will try this on my 800 HD se..