DM800 - 82 Bootloader - CA Error

[southpaw83]

Hi

As per my previous thread I've gubbed my DM800 now messing with it :-(

Will the CA Error fix work with an 82 sim bootloader?

[andy91]

Hi

As per my previous thread I've gubbed my DM800 now messing with it :-(

Will the CA Error fix work with an 82 sim bootloader?

You firstly need to find the correct image for your box and match the sim up.
Can you get the box to boot and say stop?
If not its Dreamup and lots of patience.

Andy.

[southpaw83]

You firstly need to find the correct image for your box and match the sim up.
Can you get the box to boot and say stop?
If not its Dreamup and lots of patience.

Andy.

Nope, can't get the stop message Andy. It's no CA found on the display, so cant get the stop message :-(

[andy91]

Nope, can't get the stop message Andy. It's no CA found on the display, so cant get the stop message :-(

Good tut on here for No Ca Found.
Hope you have a Null modem cable and Dreamup.
When i did a mates No Ca Found i also used ethernet but its trial and error.Dreamup 1.3.3.4 worked for me but its not for everyone,good luck.
Make sure you have correct image to match your box.

Andy.

[southpaw83]

Getting a file too big error now

[southpaw83]

Fixed, flashed with a null modem and Ethernet cable.

Back up and running

[andy91]

Fixed, flashed with a null modem and Ethernet cable.

Back up and running

Well done mate which imaage did you use?
Did it work straight away or did it take a few goes to get a ping?

Andy.

[southpaw83]

Well done mate which imaage did you use?
Did it work straight away or did it take a few goes to get a ping?

Andy.

Worked straight away mate, was surprised. I used open PLI which is the image I had been using for months :: Thanks for your help bud, always good to have someone answering yer thread!

Now to see if we can get this satellite turning

[andy91]

Worked straight away mate, was surprised. I used open PLI which is the image I had been using for months :: Thanks for your help bud, always good to have someone answering yer thread!

Now to see if we can get this satellite turning

I prefer the Dreamelite like most,just make sure if your going down the usals route choose simple for tuner and put in correct longitude and latitude and you should be ok.

Andy.

[southpaw83]

I prefer the Dreamelite like most,just make sure if your going down the usals route choose simple for tuner and put in correct longitude and latitude and you should be ok.

Andy.

Dream Elite now loaded. Nothing

Will just need to check with the DM500 tomorrow

[andy91]

Dream Elite now loaded. Nothing

Will just need to check with the DM500 tomorrow

What do you mean by nothing?
Have you set up the Cccams,bouquets and tuner etc?

Andy.

[southpaw83]

Nothing as in nothing from the motor when I try and move it

Everything else is fine.

[smirnoff_rules]

u read this http://www.digital-kaos.co.uk/forums...-dm800-108809/

[southpaw83]

u read this http://www.digital-kaos.co.uk/forums...-dm800-108809/

Nope. Will give it a try. Thanks mate

[The fat man]

Hi I posted on your other thread about dish not moving hope it helps because mine can be a right stubburn bugger sometimes.