DM800se mesage

[dercio]

just notice now my dm800se a system message

hardware could not be verified

please contact dream multimedia support. code 0x1800f

any help would be great


thanks

[smirnoff_rules]

did u update f/w in menu ? sounds like a clone and if u update it knows

[dercio]

did u update f/w in menu ? sounds like a clone and if u update it knows

F/W ? not sure hardly use this box before

[dercio]

dm800se tuner empty

my dm800se was working before ca no found now iv restored box says tuner a (empty) nothing same with tuner b what can i do i have openpli 2.1 beta image with bl82

anyone can help me

thanks in advance

[micflair]

F/W ? not sure hardly use this box before

Just reflash it mate with the same image, when it comes up with new firmware found do you want to update, click no, and you will be fine

[micflair]

Try reflashing again mate, then if that doesn't work try a different image pal to make sure its not an image problem.

[dercio]

Just reflash it mate with the same image, when it comes up with new firmware found do you want to update, click no, and you will be fine

yes i sorted this problem thanks .... new problem i have is no tuner beening dectected even though green light is on says no tuner is pluged in

[smirnoff_rules]

have u gone into settings and tuner config and set tuner up

[dercio]

Try reflashing again mate, then if that doesn't work try a different image pal to make sure its not an image problem.

what image you recommend for me to use ?

[dercio]

have u gone into settings and tuner config and set tuner up

yes says ...

tuner A : ( empty )
nothing
tuner B : ( empty )
nothing

dnt no what i can do more even though like is green on the tuner in unpluged it and put it back but still nothing

[mo.p]

my dm800se was working before ca no found now iv restored box says tuner a (empty) nothing same with tuner b what can i do i have openpli 2.1 beta image with bl82

anyone can help me

thanks in advance

hi m8 open your box have look at the tuner u mite have to push in

[dercio]

hi m8 open your box have look at the tuner u mite have to push in

have done that many times and still nothing

thanks

[mast]

Hi

Try flashing the original image box came with, thats what worked for me after Id done the exact above.

Regards

[dercio]

Hi

Try flashing the original image box came with, thats what worked for me after Id done the exact above.

Regards

what is the original image ? can you give me a link were i can find it would help alot

thanks

[mast]

Hi

Soz didnt explain proper, which image did box have on when you got it as mine had the russain one which I had to flash as I was getting issues when flashing other images.

Once I flashed that on I was able to configure the tuner and scan after that Ive manged to flash other images as long as they`re the correct ones for your box.

Regards