boot on 800

[porter1]

usual problem on dream,only ethernet lights on and not booting,after a lot of messing(power on and off,holding power button)gets to loading bar then got near the end and goes to ypbpr thats all it says,seen this before on my box(this is m8s) saying dvi which are just the video connections,at this stage not detected with dream enum tuner fitted not long before this started playing up (fitted by a expert not myself)is this a bootloader problem(brand new tuner)

[porter1]

follow on from this,found the sim contact broke,held sim down pushing on it and it loads but only to a screen saying dvi

[porter1]

will dream up connect to this on a stop screen saying dhcp,have managed to get that mesage

[porter1]

dream enum wont find it,fixed the sim contact and built it all again,still loads fully then goes back to screen saying dvi,cant even find nothing on google ,strange,says dream elite 76c,sim 2.01 to start before loading bar kicks in

[andy91]

You saying you have fitted a new tuner or not and wont it fully load image?

Andy.

[porter1]

m8 got the new tuner fitted by someone we know,was fine for a week or so then started messing up messing up,in the end wouldnt load,so i tried refshing it and had trouble getting it to even power up on screen,found the sim contact was faulty(had to push down on it)fixed that but loads and goes to screen saying dvi(tuner is not the new one he got fitted now,trying with my tuner from my 800 which has a blown capacitaor)

[andy91]

m8 got the new tuner fitted by someone we know,was fine for a week or so then started messing up messing up,in the end wouldnt load,so i tried refshing it and had trouble getting it to even power up on screen,found the sim contact was faulty(had to push down on it)fixed that but loads and goes to screen saying dvi

Would start flashing again with a new fresh downloaded image even something like pli or nemisis.
Any chance you can try another power supply,they often cause alot of other problems,

Andy.

[porter1]

power supply is new one from maplins,a lot better,the other two i had blew(cheap stuff)if dream enum wont connect dont think flash will,do get the stop screen when i hold power button in,onlt have rs port on my lads pc(havent got a adapter for lappie yet) might try tomorrow on his,be ordering for myself from tony this week,what sim,boot are on the latest from tony,the ?115 quid one,m tuner

[andy91]

power supply is new one from maplins,a lot better,the other two i had blew(cheap stuff)if dream enum wont connect dont think flash will,do get the stop screen when i hold power button in,onlt have rs port on my lads pc(havent got a adapter for lappie yet) might try tomorrow on his,be ordering for myself from tony this week,what sim,boot are on the latest from tony,the ?115 quid one,m tuner

Latest Dreambox from Yaoxin,Tony are the Pro version with Sim 2 bl 82 M rev 801A Tuner.
Think i would get another psu from Tony,dont know anyone using power supply from Maplins that could be your problem.

Andy.

[porter1]

same voltage as dream ones,there a dream elite image for the new 800

[andy91]

same voltage as dream ones,there a dream elite image for the new 800

One in downloads but newer bootloaders get released all the time.
No harm in trying others like Nemisis thats meant to be good.
My mates box constantly used to boot with Dreamelite,hes gone to Openpli and now all ok so worth a shot.

Andy,

[porter1]

i had pli on mine for short time before part burnt,seemed very fast,cheers andy,see what happens tomorrow,try and flash,thanks

[porter1]

its flashing at the min,hope it works,over a n hour to wait,fingers crossed

[andy91]

its flashing at the min,hope it works,over a n hour to wait,fingers crossed

Hi mate why are you not using web browser to flash?
Takes minutes mate and loads better on the dreambox800.

Andy.

[porter1]

doesnt boot up to get ip m8,twenty mins left