dreambox 800hd pvr clone.help

[shae0191]

Please someone help. I have been at this box since yesterday morning when it arrived and my head is ready to explode. firstly it took me ages to set up on the gemini and when i tried to get an image the whole thing came up error. I have now tried different images and got dream elite on.i have channels but when it comes to setting up this card share thing,i have network test ok but can not for the love of anything get software updates or absolutely anything. I am not a one for giving in and like a challenge but honestly this is beating me hands down and the kids are sick of me in front of the t.v with a blank screen and a builders arse winking back at them. i moved from eurovox and starpoo for good reasons and i am now stuck on something that i thought would be easy enough to do. Please someone help me anyway possible and i am also in tyneside.

[briang97]

you need more than just the image m8 you need access to a shared card.

[alom5]

have you got the fta stuff working....like bbc and itv?

[iggy]

Have u installed Cccam from the tspanel via the remote?

[stewiebee]

Openbox was easy to setup.Dreambox needs more reading up on to setup but worth the time and effort.

[andy91]

Sounds like your almost there if you have channels mate,sounds like your struggling with your network.
If you are tell us what your router is and we can tell you what you need to put in network settings.
I take it you have ethernet cable going from box to router or you're using bridge or homeplugs?

Andy.

[shae0191]

Hi there, i have got all fta and from here im lost. read up on some threads and burnt my brain out . think i need more than an idiots guide but determined to not let this get the better of me yet. could do with a slightly simple guide from here onwards if possible,thanks for intrest and any help.

[andy91]

Give us a bit more info and we might be able to help even if its by pm.
Take it the box is a Dreambox 800 are you static or motorised dish the last bit we cant talk about openly on here but that bits not hard if you have the required info

Andy.

[shae0191]

Hi bud, well i am on static satellite and also my dm is connected to wireless router by ethernet cable. on installation i set up basic settings and do not know if this is why i can not get plugin updates etc.installed (sim201e-75-OE16-DreamEliteBH-124-DM800-2010405.nfi) as my box is BL#75. dont know if i need anymore software or where to go from here.HAPPY DAYS

[andy91]

Hi bud, well i am on static satellite and also my dm is connected to wireless router by ethernet cable. on installation i set up basic settings and do not know if this is why i can not get plugin updates etc.installed (sim201e-75-OE16-DreamEliteBH-124-DM800-2010405.nfi) as my box is BL#75. dont know if i need anymore software or where to go from here.HAPPY DAYS

What sort of time is this to be posting was bout to go to bed.
Have you done a network test should look like my picture if you choose your own ip and have dhcp disabled.
Andy.

[andy91]

This is my set up,ive set it up for a static ip address with dhcp disabled.
Notice how my ip address at the top mirrors the gateway ip address which is my routers ip address barring the last digits.
Depending on what router you have it should look similar to this set up.
My router is a belkin,if yours is the same copy mine and you will be connected and almost there.
Gateway and nameserver should be same ip address as your router mate.

Andy.

[shae0191]

Hi mate, i have net-gear and and set up ip,gateway and sub net manually which i have done network test and all is ticked as shown in your attachment.is there more steps to take before going to next level mate.this is definitely not for a novice let alone beginner and your help is greatly appreciated.thanks