tune fail, help please....

[Bulld0g]

Adjust your Long m8 move up in point 2 and see if it gets better or move down the same ie. Long 2.6 move 2.8 3.0 etc and the same down. your dish could be slightly out and moving your long may help

[The fat man]

The position needs fine tuning but thats best left for another time I think!

[saj1985]

Adjust your Long m8 move up in point 2 and see if it gets better or move down the same ie. Long 2.6 move 2.8 3.0 etc and the same down. your dish could be slightly out and moving your long may help

i'll give this a go tommorow,
i mean that this time

The position needs fine tuning but thats best left for another time I think!

yea defo!

im using dream elite,
how do i download a c*cam & the c*cam cfg?

also on dm800se does it also go under ver/etc the cfg?

[Bulld0g]

Green\Yellow\addons download manager\Cams
Yes still the same directory m8

[saj1985]

Green\Yellow\addons download manager\Cams
Yes still the same directory m8

thats that sorted

just wanted to ask,
am i right in thinking that if i wanted to physically align the dish to get maximum snr, should i do that whilst on thor 0.8w?

[southpaw]

If you mean tweaking the long/lat as per bulldogs tip ,I would choose your weakest sat signal

[saj1985]

Adjust your Long m8 move up in point 2 and see if it gets better or move down the same ie. Long 2.6 move 2.8 3.0 etc and the same down. your dish could be slightly out and moving your long may help

just a update,
sorted the snr out now!

If you mean tweaking the long/lat as per bulldogs tip ,I would choose your weakest sat signal

thanks for the tip!

usals, is wicked!

[saj1985]

hey peeps,
i just wanted to ask with usals,
is there anyway i could tell the dish to move right or left manually through the reciever like i could with diseqc?

some peeps are getting 7w at the moment with obviously stronger signals,
im based in brum with a 90cm dish so i wanted to give it a go,
but i understand that 7w is more like 7.3w,
so need to nudge the dish a little more west,
hence my question

[Fergal]

Put it on 7w then press menu,setup,service searching,positioner setup,positioner fine movement, red or blue to get the best snr then store position, see if that works.

[saj1985]

Put it on 7w then press menu,setup,service searching,positioner setup,positioner fine movement, red or blue to get the best snr then store position, see if that works.

hey bud,
i put it on 7w, moved the motor slightly more west, got a it flicking onto lock at 29%snr,
on some channel called '4shababquran' (just tried the first one i saw),
so i store it, when i get out of the menu and go back on to the channel,
the motor moves it back to 7w, any ideas?

[Fergal]

Go into tuner config and take note of your longitude setting then tweak it by .2 + or - increments until you get the snr up again on that channel.

[saj1985]

Go into tuner config and take note of your longitude setting then tweak it by .2 + or - increments until you get the snr up again on that channel.

i'll give it a go tomorrow if i get a chance,
but i have already tweaked the longitude to get the best snr for all the satellites which i receive