Cant load Sgt Flipflop bouquet

[skronk]

First attempt at d/l this to my DM800se

Keep getting.....

Connecting.
Connected.
Dreambox response: Login successful.
** Getting directory list /etc/enigma2/* **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/lamedb" **
Starting FTP transfer
Transfer aborted
Error sending file "lamedb" to the Dreambox.
Disconnecting.
Disconnected.

What am I doing wrong

[freck]

Goto the options tab on DBEdit and select Enigma 2 receiver....its set to E1(satellite box) by default.
Try it out plus make sure youve got the E2 channel list and not E1 as mentioned above.
Freck

[skronk]

Hi ,

I am using the following :SGT flipflop Enigma 2 16.10.11 (Multi)

Settings in DB edit all for Enigma 2

Help !!!!!!!!!!!!!!!

[freck]

OK....make sure dhcp is turned on in your network settings of your box.
Enter the ip address of the box into DBEdit and try it again...if that dont work your gonna have to setup a network between your pc and your box and use a crossover cable to ftp the info.
Freck

[Rough Daimond]

make sure the I.P address is correct in DBE and make sure it is the same one as your box (check under network settings on your box), also your router might have released/renewed a new I.P since you tried it last, it might have changed, if so you will have to create a new connection in DBE to reflect any change.

[davvo]

you get the

Error sending file "lamedb" to the Dreambox

cuz you have not set the right path to send the files to your DM

see pic

[skronk]

you get the

Error sending file "lamedb" to the Dreambox

cuz you have not set the right path to send the files to your DM

see pic

Thanks for your input but Enigma 2 was already selected. Still won't work.

[davvo]

try the version 3 setting

it fails again at the top of DBEDIT click info then log
and post the log

[mtv1]

when you go to ftp make shure you open the file just selecting it is not enuff , it must open the file you will see it load

[skronk]

when you go to ftp make shure you open the file just selecting it is not enuff , it must open the file you will see it load

I don't understand. You can only highlight it then attempt to upload.

[freck]

All is explained here...should cure your problem.
If that fails then check your cables.
Freck