flashing vi web browser problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • steevs28
    Junior Member
    • May 2009
    • 30

    #1

    flashing vi web browser problem

    Im trying to flash via web browser but every time I enter the ip address I just go to dreambox web control and not the flash image page.

    It even does this when i boot up using the hold the power button trick while inserting power cable and with the ip address showingin the digital display

    Is there another way to flash?
  • micflair
    Senior Member
    • Jul 2009
    • 275

    #2
    I had this the other day, was wierd. I turned off the box, unplugged it and left it for a bit, then hooked it all up and tried again and it worked. Dont ask how.

    Other way to flash will be via dreamup mate.

    Comment

    • gji25
      DK Veteran
      • Feb 2010
      • 353

      #3
      power your box down/ hold the on switch on the front of the box then turn power back on then enter ip of dreambox into your web browser
      dm500hd -dm500hd v2-vu+duo- triax 1.1m - inverto lnb - technomate 2300 motor- linksys ddwrt router

      Comment

      • cokesux
        Junior Member
        • Nov 2011
        • 34

        #4
        You might try refreshing the browser as, even in stop-mode (webflash), sometimes the browser displays the page from it's cache, rather than the flashing interface.

        --
        Newbie My ASS...

        Comment

        Working...