Cam Installation

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zoobihoobi
    Newbie
    • Aug 2009
    • 16
    #1

    Cam Installation

    I have DM 500 HD with Gemini iCVS image. Unfortunately I updated software through software update and lost CCam.
    I installed tunisasat plugin enable me to install CCCam 2.2.1 but there are lot of cams section and every cam is different with image name like LS, Nemesis etc. I am confused.

    Does every image has different Cams or shall I install any cam and it will work on my image. I tried to install many but nobody is working, don't know why

    Please help me.
    Tags: cam, installation
    • Bulld0g
      V.I.P. Member
      • Apr 2008
      • 7158
      #2
      Sounds like you have overwritten your CCcam.config file which contained your Cline. You need to contact your provider.

      THE TRUTH
      The Hillsborough Independent Panel. 12/09/12
      Today's report is black and white.The Liverpool fans were not the cause of the disaster.
      The panel has quite simply found 'no evidence' in support of allegations of 'exceptional levels of drunkenness, ticketlessness or violence among Liverpool fans' and 'no evidence that fans had conspired to arrive late at the stadium' and 'no evidence that they stole from the dead and dying'.

        Comment

        • zoobihoobi
          Newbie
          • Aug 2009
          • 16
          #3
          It's not the case. I already checked and c lines are correct.

            Comment

            • smoggie
              DK Veteran
              • Jul 2008
              • 863
              #4
              when you installed the cam did you activate it?? alot of images press blue button on remote, select cam and press ok

                Comment

                • andy91
                  V.I.P. Member
                  • Aug 2010
                  • 3583
                  #5
                  Originally posted by zoobihoobi
                  It's not the case. I already checked and c lines are correct.
                  Once you download and install a Cccam you get a Cccam.cfg file with loads of writing in.
                  If you have put another Cccam in this will be the case.
                  Best thing to do is look at you're Cccam.cfg and view it and see whats exactly in the file.
                  Use a ftp program like flashfxp to view it.

                  Andy.
                  New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

                    Comment

                    • alom5
                      DK Veteran
                      • Nov 2008
                      • 1648
                      #6
                      open ts pane...at the bottom there is emu manager. when you open that you can see if you have a cam installed and if running. if none installed, install cam by pressing the blue button and restart.

                      then goto cccam.cfg and edit the required bits and restart the cam again. all sorted.

                        Comment

                        Previous template Next
                        Working...