OpenPLI 2.1 for DM800 sim 2.01 SSL 84b For SG

[comber]

can i take the booting up image of this image of the mountains and map
and put it on to an earlier edition of a openpli image as i am having problems with this one ..
not see satellites in the configuration
yet reconizes tuner no problem satellits keep going missing in the list

[00360362878]

can i take the booting up image of this image of the mountains and map
and put it on to an earlier edition of a openpli image as i am having problems with this one ..
not see satellites in the configuration
yet reconizes tuner no problem satellits keep going missing in the list

If you mean there are sats not there that you want to use, you can add them yourself.

[IAmATeaf]

I had this same problem with the sl84b image, for me I reflashed and it then started working.

For the bootlogo I've found these instructions:

* If the image is in flash, the /boot repertory is assembled in reading only, to be able to replace the bootlogo.mvi, it is simply necessary by telnet to mount the repertory in read/write:

telnet
copy/paste the Code:
mount - O rw, remount /boot
validate
then with DCC go to usr/boot
there are 4 files which interress us
bootlogo.mvi (it is the 1ire image which one sees with starting)
backdrop.mvi
bootlogo_wait.mvi
switchoff.mvi
the 3 last files contain the image which remains until the appearance of the channels...

you now can go to usr/boot using DCC and replace the file bootlogo.mvi (safeguard it somewhere if you want to keep a trace of the old picture***8230 by the new image which you have just created: rename it bootlogo.mvi then send it with DCC which will ask you if you want to replace the file which already exists***8230; yes.

renew the operation with another image and TMPGenc which you rename and replace for:
backdrop.mvi
bootlogo_wait.mvi
switchoff.mvi
(the same image encoded for the 3 files)
(save backdrop.mvi/bootlogo_ wait.mvi/switchoff.mvi if you want to keep a trace of the old image)


after that just reboot the dreambox.

[IAmATeaf]

So if you do the mount command on the new image you should then be able to make a copy of the bootlogo then replace on the other image.

[comber]

cheers give it a go
i downloaded catseyes list via ts panel
channels where all there and bouquets etc was missing the sats on every list i tried ,,
gone back to a earlier verson of pli

[comber]

thanks for this ,,there is no boot folder unnder usr.
i have dm 800hd clone
do i make a boot folder

[IAmATeaf]

OK, have a look in /usr/share where there should be the files bootlogo.mvi and switchoff.mvi, make a copy and then replace. Again this is what I've read so have not tested.