multisat setup

[Nav2010]

hi guys, am tryin to setup my multisat system again on dm800 clone with dreamelite ssl84, am having major problems with it i can manage to get sly uk fixed and working but i cant get any others (4.8e 13e etcc) its been a few yrs since i first set my multi up with a friend and i cant remem the settings we used, HEEELLPPP its drivin me insane, kwik run down of my settings:
Tuner A : BSBE2, Advanced
Satellie : Astra (28.2)
LNB : 1
Priority :1
LOF : Universal LNB
Voltage Mode : Polarization
Increased Voltage : No
Tone Mode : On
DiSEqC Mode : 1.2
ToneBurst : None
Committed DiSEqC Command : None
Fast DiSEqC : No
Sequence Repeat : No
Command Order : ToneBurst Committed
Uncommitted DiSEqC Command : None
DiSEqC Repeats : None

Edit - When i click on Positioner Setup, i can only select 28.2, but if i go into Satfinder it has all the other satellites i want, but when i select them from satfinder its goes way off the mark 13e dish thinks its at 6w :S

[davvo]

if you want to set it in the advance page

LNB1 for all sats
then
change this
Committed DiSEqC Command : None
to AA

or use usals on the simple page
mode Positioner
enter your long and lat