DM800 Clone, driving me nuts, won't reebot..

[encblue]

Guys

Many thanks for the replies...

Yes, the image suggested worked

But now i can't get my network connection to work???

Therefore i can't download Cccam :-(

Any ideas?

[portbhoy]

How do you have it connected, wireless or wired have you enabled DHCP?

[andy91]

Have a look at this present thread mate it will help with your network setup.
Router is gateways and nameservers ip address.
Turn off dhcp and make your own dreambox ip mirroring your routers ip address.

http://www.digital-kaos.co.uk/forums/f213/cant-connect-ftp-271180/index3.html#post1558213

Andy.

[encblue]

Hi

It's wired

Yes DHCP is enabled

When i do a network test, only thing that shows as unconfirmed is nameserver?

When i set it up before i used the connection wizard, and when i hit the green button, i could download cams, not it says connection failed?

How do you have it connected, wireless or wired have you enabled DHCP?

[andy91]

Nameserver needs to be the same as gateway as a rule.

Andy.

[encblue]

It is the same?

I want to cownload cams via download manager... when i do a network test it says it's connected?

[andy91]

It is the same?

I want to cownload cams via download manager... when i do a network test it says it's connected?

Are you connected or not?
Depending on your image you might not be able to download.
If thats a problem you can download Cccams via Tspanel.

Andy,

[encblue]

Sorry, still struggling with this..

When i go to network wizard, it says i'm connected and working.

If i use the green button, add on downloads manager, i keep getting, Sorry Connection failed?

If i go to TS Panel, addons, it says addons download failure, no internet connection or server down?

Yet network wizard says it's connected?

I'm totally confused !

[portbhoy]

Turn off box, reboot modem and router then after a while turn on the box.

[andy91]

Does sound weird.
Again i would reflash and start again for how long it takes via web browser and assign a static ip address.
Could be a bad flash which image are you using?


Andy.

[encblue]

Thanks guys, working now.

Reboot did the trick !

[andy91]

Thanks guys, working now.

Reboot did the trick !

Go into network and right down all the settings incase you have similar problems.
Glad you got sorted,

Andy.

[bachineko]

DM800 clone . wont boot

hello everyone , i new to this dm800 , just bought this clone set online and checking over the setting ,i,ve hit the update . and here i am , seeking crazy for info on how to flash this set back .... nothing seems to work . hopefully the above attach file works .. finger cross

[dream4u2]

I have similar problem

Hi
I have a similar problem with a DM800 with NabiloBlackHole_DM800_09 and second stage bootloader ver. 69 that suddenly cant boot any more. Even if I try to reflash it to the same build that use to work. I have tried to remove the Tuner and checked the sim card. But still no luck. There i s a boot picture for some seconds. Then black screen. And then it hangs with the boot meter just below the b in booting. after some minutes it just start over again.