In order to record a timer, the tv was switched to the recorded service on dm800hd se

[andriusv]

In order to record a timer, the tv was switched to the recorded service message appears when i press record button on genuine dm800hd se
Please help how to resolve it.

[Lewiscc]

hi mate .....it's only a single tuner so it has to be on the channel (or one from the same tp) to record .... not sure what you want resolving andri ... it is what it is.

[andriusv]

Hi, i understand this but the message comes up even when i want to record the channel i am watching.

[micflair]

Hi, i understand this but the message comes up even when i want to record the channel i am watching.

I had this, turned out the image was buggy. Try another image mate.

[edlimym]

Hi, i understand this but the message comes up even when i want to record the channel i am watching.

hi there, run DCC and select FTP. go to the hdd at /media/hdd and create a folder and name it MOVIE. change attribute of this MOVIE folder to 777. exit DCC. try the instant recording again. hope this helps.

[juanzamit]

This are the steps I did and is working fine:

1: On your laptop/pc Format you usb storage and name it USB STICK
2: plug your USB STICK at the back of your DM800
3: switch on your DM800
4: go to the following menu>setup>system>recording paths>

press OK>menu>switch to filelist>
press OK on <parent directory>
scroll down and play around until you see /media/USB STICK under the "default movie location "

press green button on your control which means OK
press exit

repeat the same as above for Timer record location, Instant record location and Timeshift location.
When all 4 recording paths are completed press save (green button)

Enjoy!

[paapame]

@Edlimym you are the greatest. I had the same problem i follow your creating folder and changing the attribute and it work very very fine. Thank you and I thank this forum too

[mez]

hi there, run DCC and select FTP. go to the hdd at /media/hdd and create a folder and name it MOVIE. change attribute of this MOVIE folder to 777. exit DCC. try the instant recording again. hope this helps.

Mate you are genius saved me lot of time. thanks