RO1: CA NOT FOUND

[Rachid30]

Hello,

I have Dreambox 800HD se

I tried to put another image in mi box but now i have the problem that the box every time starts with R01: CA NOT FOUND.

I have tried to flash the image via Dreamup and IP of the dreambox but after i have flashed the image via IP of the dreambox the wont reboot automaticle and when i reboot the box manualy the shows again ca not found.

I allsow tried these steps but the box stil wont start.. Please help.

how to use enforcer
1) connect dead box to dreamup, press connect
2) press ok at ca error popup, any error just press ok
3) download enforcer
4) drag enfocer in front om dreamup, press enable in enforcer
5)press flash and chose flash file
6) flash probably hangs
7) connect the broken box to dreamup, press connect and try flash, chose flash file, hopefully it works now

[mast]

Hi

Give optiflasher a go.

http://www.digital-kaos.co.uk/forums/f207/dreambox-optiflasher-v1-0-3-enigma2-edition-225750/

Regards

[Rachid30]

Thank you but no it dusn't work.

[alom5]

if it is 800se, then you want to use sunray and the mini usb cable (same as the ps3 controller cable)

when you get the ip address up after connecting through sunray, just flash via the web browser.

also, if you search for the error you will find a very extensive thread which goes through everything to get the box back up and running.....also there are a few clone safe images in the downloads section here.

[Bann32]

try flashing someone elses backup so you are sure the image as the bootloader and image as not all images have a bootloader and must be flashed seperately

[Cshnyt]

check your pm rachid30 thought it may not be a good idea to send in link here in the forum regards to a seller

hope it helps.