My DM800 does not have a heatsink on the broadcom chip. Can anyone recommend a decent heatsink for the DM800 what do they use on the sim2 clones?
Cheers
Cheers
-
-
no idea but many are using a laptop cooler m8. -
Yeah going to get one of those but I worried about about the processor and tuner, they are get really hot which causes glitching then tune failed. So was hoping heatsink + internal fan will also help.Comment
-
how did you manage to get a dm800 without a heatsink, they run very hot dont think it will last long without a heatsink, get a usb laptop cooler should do the trick only few ??Comment
-
easy rattle in box,ohh what that falling out after top removed,handle with care
.
Comment
-
This is an old clone which is replica of an original box ie no heatsink. I've had a look a few pictures but not sure what to get.Comment
-
As above, notebook cooler will keep it cool with no problem.Comment
-
please press the little red THANKS tab
if I helped
if not press the green tab to tell me to f**Koff 
sometimes life will kick you around , but sooner or later , you realize you`re a warrior , and your stronger than anything life throws your way !!!!!!!!!!!!!!!!!!!!!!
Comment
-
Greetings I just got a Dreambox 800Hd Clone,It has the small fan inside it. Hope that will do.The Box is really wonderful. And this forum has helped alot. Thanks to allComment
-
Hi! I modded my clone so, that I removed the noisy fan and replaced it with 4x10cm aluminium plate. It is warm, but not hot...Comment
-
how you manage to put it inside ? Did you cut the top ?Comment
Comment