Dm800 sim 2.10 help. Can't flash

[paul crosby]

Hi all I have a sim 2.10. Dm800 that I can't flash

It will boot with picture on screen but no response remote
If I turn on with button held no ip. Shown after "stop "
Have null cable. No response tried Lots ver dream up
Lan lights on for a while then go out
I have tried swap with other dm800 let other box do the start up checks not work
I've tried the force flash. / file to small. Thing

Any help welcome

Paul

[andy91]

Im guessing when you held the button in the Ethernet cable is connected?
Easy mistake to make.

Andy.

[paul crosby]

yes mate
null cable ok tried my other 2 dm800s and they connect first time

cheers
paul

[mal2002]

could some one help me please i have a dm800 and it just gets to boot then reeboots again so i cannot see what sim i have,so i dont know what image to download,is there a way round this reebooting issue at all any help would be appreciated

[mal2002]

sorry i just realised i stole some elses post ignore mine

[andy91]

yes mate
null cable ok tried my other 2 dm800s and they connect first time

cheers
paul

Get a working box up using dreamup and ready for flashing.
Then connect the faulty box and flash using dreamup.
I've heard this works before if you have a spare box.

Andy.