dm 800 se incorrect architecture

[kemestri]

dm 800se incorrect architecture

i had a problem with dm 800se. no CA. i followed steps to restore the box ok. but i how have a problem where the box will not boot altought the no CA message has gone.
i noticed whilst restoring the box a message appeared saying wrong architecture.
anyone help here as to why wont boot, is it to do with this message about the architecture.
i have tried several images and they all start to boot but then stop. i can flash a new image ok from the browser now.

the box is dm 800se clone. sim2.10 sll 84b

[mouss800]

Try to flash clone safe image with ssl82
U need to flash using cable mini usb to usb and software sunray flash up / dreamup)

First step after everything is connected

Flash ssl82 bootloader
Then image with ssl 82 bootloader
Then flash ssl 82 bootloader

This must be done one after another
Without rebooting , after you finish all above . Then reboot or switchoff wait 5 secs then boot

After it comes back to life then , always put the right image with the right ssl bootloader