Help needed

[hedg70]

Hi i have a dm800hd pvr clone and the image i was running kept freezing on fta channels so i installed a new image but i put a original on by misstake and now i cannot get rid of it or even flash it with dreamup
all i get is erro1 : no ca found
it just goes to awaiting acknollegement from dreambox it been sitting like that for over 1-2 hours
is there any way to do a full factory reset or flash in any other way

[andy91]

Yes search for countless threads that say No Ca Found.
You will need Dreamup and null modem cable but its easily fixed you just need patience as it doesnt always work first time.
Thats linux for you,

Andy.

[hedg70]

i tried using dream up with a null modem cable and that is where it hangs waiting for box to acknolledge to flash

[andy91]

i tried using dream up with a null modem cable and that is where it hangs waiting for box to acknolledge to flash

Try a different version of Dreamup i found 1.3.3.3 to be the best but theres better out there if you search the forum.
Make sure you do it on a desktop pc and Windows XP is best.

Try this
Digital Kaos - Downloads - Dreambox NO CA FOUND Repair Tool SIM2 EDition V2.5
Check this it aint hard if you use the search button
Dont forget have a reed of the rules and thank me when its fixed.
Try and pass on anything you learn its good to give something back to the forum.

http://www.digital-kaos.co.uk/forums/f205/dm800-hd-pvr-bricked-first-day-243581/

Andy

[southpaw]

although its at "waiting for acknowledgement" it may well have an I-p address and possibility to flash it via normal browser method
use free ip scanner to search your network for its address, obviously it must be network attached via Ethernet

btw, best to title your thread with your problem, that way others can search it and save us lot repetitively typing the same drivel