Dreambox / Sunray

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • clarkyj
    Junior Member
    • Mar 2011
    • 22

    #1

    Dreambox / Sunray

    Hi folks. Have a problem with this , getting a lock in settings from my dish . But after I upload bouquets etc. getting tuner config message. When I go back into settings lock is lost . So after I get a lock again , same thing happens. Tried few different images , same prob.....

    any help appreciated

    regards
  • andy91
    V.I.P. Member
    • Aug 2010
    • 3583

    #2
    Are you using Usals or Non Usals? Is Lat and Long definitely right for where you live? Andy
    New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

    Comment

    • clarkyj
      Junior Member
      • Mar 2011
      • 22

      #3
      Andy cheers for the reply, tbh . It's a fixed dish , and usuals is off . Any other stb I've sorted it's been simple case off uploading bouquets and set sat, and bobs ur uncle sorted...

      Comment

      • andy91
        V.I.P. Member
        • Aug 2010
        • 3583

        #4
        Have you actually been into tuner configuration and set the tuner up? Doesn't matter with a fixed dish what long or lat you have in but the tuner must be configured. Easiest way is simple, positioner. Andy
        New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

        Comment

        • clarkyj
          Junior Member
          • Mar 2011
          • 22

          #5
          Yes bud turner set, bud when I get a lock , leave that menu . Hit say bbc 1 , I get a turner config message. ,go back into that menu , and the lock has dropped off

          Comment

          • andy91
            V.I.P. Member
            • Aug 2010
            • 3583

            #6
            Could be a couple of things, are you saving the settings? Don't you have to select 28.2 on these boxes? Nit got one myself only the hd. Try a fresh set of bouquets? See if the tuner has came unseated? Try a new power supply? Andy.
            New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

            Comment

            • andy91
              V.I.P. Member
              • Aug 2010
              • 3583

              #7
              Have you gone into menu/setup/service searching/tuner configuration? Andy. Check thumbnail picture enclosed
              Attached Files
              Last edited by andy91; 5 August, 2013, 10:20. Reason: Added picture and info
              New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

              Comment

              • clarkyj
                Junior Member
                • Mar 2011
                • 22

                #8
                Yes matey I have done that. Will try different bouquets, and get back to ya. Am just while ur here . I have an original 500 hd, best place to buy an drive for recording and multi epg, there's only an e sata on the back ...

                regards

                Comment

                • andy91
                  V.I.P. Member
                  • Aug 2010
                  • 3583

                  #9
                  China is cheapest if you were to buy another box and ship them together, Andy. h**p://www.mixeshop.com/brand-new-sata-hdd-25inch-250gb320gb500gb640gb750gb-for-dm-box_p2569.html
                  Last edited by andy91; 5 August, 2013, 10:43.
                  New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

                  Comment

                  • blueflash234
                    DK Veteran
                    • Mar 2009
                    • 904

                    #10
                    when you go into the menu as andy says change positoner to disceq and select 28.2 save and you should be good to go

                    Comment

                    • clarkyj
                      Junior Member
                      • Mar 2011
                      • 22

                      #11
                      ok thx very much

                      Comment

                      Working...