Enigma 2 could not be started

[orly]

Hi,

I have some trouble to run enigma 2 :

- A lot of errors occured (it seems that some interfaces are missing on my target board).
- enigma crash at the end

Do you know the list of required services to get back something on screen ?
What are the most critical errors to fix ?

Could you help me please ?

Here is a small log of enigma2

Thanks in advance,

PYTHONPATH: /usr/local/lib/enigma2/python:/usr/local/lib/python2.7:/usr/local/lib/python2.7/lib-dynload:/usr/lib/python2.7/:/usr/lib/python2.7/lib-dynload
+ (30) eActionMap
+ (1) Background File Eraser
+ (20) RC Input layer
+ (21) input device driver
+ (21) Console RC Driver
+ (20) AVSwitch Driver
+ (20) UHF Modulator
+ (20) misc options
+ (21) LIRC RC Driver
+ (35) CI Slots
+ (20) DVB-CI UI
+ (10) gRC
+ (9) Font Render Class
+ (9) GFBDC
+ (9) gLCDDC
+ (8) graphics acceleration manager
+ (15) eWindowStyleManager
+ (40) eServiceCenter
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (9) GFBDC
resolution read out from fb: 1920 x 1080

16220kB available for acceleration surfaces.
resolution: 1920 x 1080 x 32 (stride: 7680)
+ (9) gLCDDC
couldn't open LCD - load lcd.o!

The interface /dev/dbox/lcd0 doesn't exist on my target board.

+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) RC Input layer
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!

Enigma tries to open the following file (without succes) :
/proc/stb/fp/lnb_sense%d", m_slotid)

Then it tries to listen the interface associated to the front processor. The interface doesn't exist on my target board.
// open
int fp=:pen("/dev/dbox/fp0", O_RDWR);

+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!

The interface doesn't exist on the target board.

+ (20) misc options
+ (20) DVB-CI UI
+ (21) input device driver
Found 0 input devices!
+ (21) Console RC Driver
failed to open /dev/vc/0

The interface doesn't exist on the target board.

+ (21) LIRC RC Driver
[elirc] open [f:/dev/lirc0] [h:8]
[elirc] #error# cannot connect to lirc

The interface exists yet and the process /usr/sbin/lircd has been started. I have noticed the following stack trace in my kernel log
? [ 753.000000] lirc-stm: IR RX overrun ?

+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots

The interface doesn't exist on the target board.

+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 2945 services
scanning for frontends..
opening frontend 0
detected terrestrial frontend
close frontend 0
opening frontend 1
detected terrestrial frontend
close frontend 1
opening frontend 2
detected terrestrial frontend
close frontend 2
opening frontend 3
detected terrestrial frontend
close frontend 3
opening frontend 4
unknown frontend type.
unknown frontend type.
opening frontend 5
unknown frontend type.
unknown frontend type.
opening frontend 6
unknown frontend type.
unknown frontend type.
found 1 adapter, 4 frontends(4 sim) and 8 demux
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache
[EPGC] time updated.. start EPG Mainloop
Loading spinners...
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
=>initTvui()
[FONT] adding font /usr/local/lib/seashell/Vera.ttf...OK (abalone-sans)
[FONT] adding font /usr/local/lib/seashell/VeraBd.ttf...OK (abalone-sans-bold)
Server: connect from 
couldn't open fp

The interface doesn't exist on the target board.

enumerating block devices...
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1'], device=sda
found block device 'ram0': ok, removable=False, cdrom=False, partitions=[], device=ram0
found block device 'ram1': ok, removable=False, cdrom=False, partitions=[], device=ram1
found block device 'ram2': ok, removable=False, cdrom=False, partitions=[], device=ram2
found block device 'ram3': ok, removable=False, cdrom=False, partitions=[], device=ram3
found block device 'ram4': ok, removable=False, cdrom=False, partitions=[], device=ram4
found block device 'ram5': ok, removable=False, cdrom=False, partitions=[], device=ram5
found block device 'ram6': ok, removable=False, cdrom=False, partitions=[], device=ram6
found block device 'ram7': ok, removable=False, cdrom=False, partitions=[], device=ram7
found block device 'ram8': ok, removable=False, cdrom=False, partitions=[], device=ram8
found block device 'ram9': ok, removable=False, cdrom=False, partitions=[], device=ram9
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'ram10': ok, removable=False, cdrom=False, partitions=[], device=ram10
found block device 'ram11': ok, removable=False, cdrom=False, partitions=[], device=ram11
found block device 'ram12': ok, removable=False, cdrom=False, partitions=[], device=ram12
found block device 'ram13': ok, removable=False, cdrom=False, partitions=[], device=ram13
found block device 'ram14': ok, removable=False, cdrom=False, partitions=[], device=ram14
found block device 'ram15': ok, removable=False, cdrom=False, partitions=[], device=ram15
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'mtdblock5': blacklisted
sec config cleared
Traceback (most recent call last):
  File "/usr/local/lib/enigma2/python/mytest.py", line 28, in <module>
    import Screens.InfoBar
  File "/usr/local/lib/enigma2/python/Screens/InfoBar.py", line 12, in <module>
    from Screens.InfoBarGenerics import InfoBarShowHide, \
  File "/usr/local/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>
    from ChannelSelection import ChannelSelection, BouquetSelector
  File "/usr/local/lib/enigma2/python/Screens/ChannelSelection.py", line 10, in <module>
    from EpgSelection import EPGSelection
  File "/usr/local/lib/enigma2/python/Screens/EpgSelection.py", line 8, in <module>
    from Screens.TimerEdit import TimerSanityConflict
  File "/usr/local/lib/enigma2/python/Screens/TimerEdit.py", line 6, in <module>
    from Components.TimerSanityCheck import TimerSanityCheck
  File "/usr/local/lib/enigma2/python/Components/TimerSanityCheck.py", line 4, in <module>
    from Components.NimManager import nimmanager
  File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 1043, in <module>
    nimmanager = NimManager()
  File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 623, in __init__
    InitNimManager(self)    #init config stuff
  File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 1041, in InitNimManager
    nimmgr.sec = SecConfigure(nimmgr)
  File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 394, in __init__
    self.update()
  File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 127, in update
    eDVBResourceManager.getInstance().setFrontendSlotInformations(used_nim_slots)
StandardError: eDVBResourceManager::setFrontendSlotInformations list size incorrect 4 frontends avail, but 0 entries in slotlist
=>exitTvui()
---- saving lame channel db [/local/etc/enigma2/lamedb]
saved 156 channels and 2945 services!
release cached channel (timer timeout)
[EPGC] 0 events written to /hdd/epg.dat
set RTC to previous valid time
+ (30) eActionMap
+ (1) Background File Eraser
+ (20) RC Input layer
+ (21) input device driver
+ (21) Console RC Driver
+ (20) AVSwitch Driver
+ (20) UHF Modulator
+ (20) misc options
+ (21) LIRC RC Driver
+ (35) CI Slots
+ (20) DVB-CI UI
+ (10) gRC
+ (9) Font Render Class
+ (9) GFBDC
+ (9) gLCDDC
+ (8) graphics acceleration manager
+ (15) eWindowStyleManager
+ (40) eServiceCenter
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (41) eServiceFactoryFS
- (40) eServiceCenter
clear instance
- (35) CI Slots
- (30) eActionMap
- (21) input device driver
- (21) Console RC Driver
- (21) LIRC RC Driver
- (20) RC Input layer
- (20) AVSwitch Driver
- (20) UHF Modulator
- (20) misc options
- (20) DVB-CI UI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
KILLED BY signal 11
-------
Segmentation fault

[digicon]

It may help some members with replies if you state the make and model of your Enigma2 receiver

[orly]

Thank you for your help.

Receiver: the target system is the ST Orly (STiH416).

http://www.bdtic.com/DownLoad/ST/STiH416.pdf

The output screen is an HDMI TV screen (1920x1080).

[southpaw]

Thank you for your help.

Receiver: the target system is the ST Orly (STiH416).

http://www.bdtic.com/DownLoad/ST/STiH416.pdf

The output screen is an HDMI TV screen (1920x1080).

I very much doubt you will get help here with this project mate, getting enigma2 running on a Soc dev board is outside the skillset of most peeps here, who mostly use dreambox and Vu dedicated stb units for running e2 images, good luck in you project tho, it looks a difficult task to accomplish but a really nice powered unit if you do pull it off

[digicon]

Another STi chipset wannabe similar to how it runs on the amiko's as stated above good luck you will need it, E2 for receivers was specifically designed to run smooth on Broadcom/Mips chipsets and no others

[orly]

Thank you very much for yours responses.

You're right, Enigma is really specific to dreambox. Kernel and components of the ST Orly platform are really different to dreambox's component and kernel.

So, I'll have to wring Enigma or use another software.