HELP ... No boot after flash - DM800 HD

[slamdonk]

After flashing my new DM 800 HD, I cant get it to boot.
I flashed it through the web interface, using my IP, and now, I can only get it to boot with the Dream MultiMedia text on the LCD. NOTHING else happens.
Tried connecting through network, no luck.
Tried to get in via Null Modem, still no luck.
Tried holding the power button under boot to get in like before the flash, no luck...
What else can I do ????
Is there a way to reset it/clean it ???

[westkill]

is your box legit or a clone m8

[slamdonk]

How do I tell ????

[westkill]

were did you buy it m8

[slamdonk]

I bought it at dreamboxonline.co.uk

[westkill]

at that price i guess its a clone
what image you trying to flash

[slamdonk]

Not sure.
Think it was DreamForum-II.v10.04-DM800. Its been some days since I did it.

[slamdonk]

I flashed it via browser, had 100 % finish, but since that its been dead...

[westkill]

are you leaving it unpluged long enough before powering box up again at least a minute or so, even if using dreamup
all new images will not work on a clone to do with the bootloader
if not try dreamup with of a older image from our downloads
some thing like gemini 4.0 or 4.10

[slamdonk]

As I wrote, I not able to do anything to the box.
When I use Dreamup NOTHING happens...

[westkill]

were you powering it off long enough when starting dreamup?
or
does it say any thing else on the screen when trying to restart the box
or
what does dreamup say when it is started

[portbhoy]

Hope this helps found on another forum know ~~~~ all about these boxes

this is what i did to restore my clone box after flashing it with Blackhole v0.6 :

used a serial cable (with usb to serial convertor dongle) and Universal DreamUP to connect to DM800, also had network cable plugged in (DM800 to router).
when DreamUP found the DM800 it sent it some file.
then if you look at the DM800 display, it will show you an IP address.
type that IP address in a web browser and you will be able to flash the box using the Web IF (i sent the #69 bootloader, was done in a few seconds).

basically i used DreamUP to prepare the box for flashing via it's WebIF.

hope that helps.

[slamdonk]

nothing happens when I use DreamUp. It just hangs..
When I boot the box, I get the Dream MultiMedia text on the LCD, and nothing more happens

[portbhoy]

Did you try with both cables, is the box showing you an IP on startup. Like I said know ~~~~ all about them but will continue to google for answers

[slamdonk]

I dont get any ip, only the Dream Multimedie text, even when I turn it on, holding the Power button.. NOTHING happens.
I didnt know that there was clones and org ones, cause then I would have bought a org one for sure.