Dm 800 hd pvr clone NO CA found after image flash

[bebebxb1]

Hi all.
I have flashed a wrong pli image on to my clone dm800 hd pvr and now I'am getting no ca error.
I have read and tried every suggestion on this forum update/donwgrade bootloader,image with different tools(dream up,ncf,optiflasher)etc but no result the error appears every time i reboot the box.
The last image that worked on the box was an gemini(don't know the verion) with ssl69 or 70.
The sim version is, according to what writes on the box display "team sim 201".
Any help would be appreciated.
Thanks in advance!

[BM300]

Try cleaning your sim card.
Get the IP odf your box (it shows when you turn on the power from the mains while holding down the front button),
Then try connecting both the RS232 com cable and RJ45 Network cable.
Activate the repair bad sector option.
Using DreamUp (you may need to try diffrent versions or older ones), enter the box IP (network box ticked) and switch on your box.
Wait for the process to finish.
If it does not work try a diffrent version of DreamUP.
Just keep at it (frequent Tea brakes).
It will work and you will be surprised.
Good luck.

[southpaw]

Hi all.
I have flashed a wrong pli image on to my clone dm800 hd pvr and now I'am getting no ca error.
I have read and tried every suggestion on this forum update/donwgrade bootloader,image with different tools(dream up,ncf,optiflasher)etc but no result the error appears every time i reboot the box.
The last image that worked on the box was an gemini(don't know the verion) with ssl69 or 70.
The sim version is, according to what writes on the box display "team sim 201".
Any help would be appreciated.
Thanks in advance!

its no good saying youve tried everythin mate, to help you peeps need a bit more info of where your getting stuck, if you have managed to connect dreamup and re-flashed the image, and it did actually flash, then it reported no ca errior, then you are flashing the wrong image, you need to flash a sim201, dm800 image , plenty in download section

[bebebxb1]

Thank you all for the suggestions.
I can flash image and bootloader fine,but after reboot i get no ca error.
I tried many images(sim 201 images, because that's what it writes on the small display),on different bootloaders.
I have open the boxed to identify exactly what sim tipe i have,but the sim it's completely white without any inscription.
Any other suggestion?
Thanks in advance!

[southpaw]

if the sim is plain white, it may well be sim1 , which if i remember correctly only supported upto bl69, try google for a dm800 clone bl69 image , there may be some in download section here at dk,
simt1.jpg

[bebebxb1]

I'll try with sim 1 images and bl69,i will come back with feedback.
Thank you all!