Dm800hd Pro clone Tuner A (empty)

[valioiv]

Hey guys, I think its a bit weird that i am starting this thread again but I haven't found a solution to my problem even after i read everything about the problem. I have Dm800hd pro clone sim 2.01 SSL82. Am also running dream elite 1.33d V3, phoenix edition. The problem am facing is the tuner, it says that its empty. First, I changed the power supply and had no luck. After I reflashed with [email protected] and again no luck. Finally I bought a new tuner and I went through the same thing and nothing really helped. Does that mean I have to throw away this box or is there any chance of fixing it? If so, please help. I am simply not very familiar with these boxes. If any of you have any advice, links would be really useful too.
Thank you.

[colinh1213]

had this with a few images , try some different images , i used to get the same with blackhole

[valioiv]

Thanks mate i moved to ssl84d and i did try olredy 9 images but no luck.Is it posible to get back to ssl82 to try other images?

[00360362878]

Thanks mate i moved to ssl84d and i did try olredy 9 images but no luck.Is it posible to get back to ssl82 to try other images?

Hi mate. Try your box on a mates setup if pos, that will eliminate any cable, dish and LNB issues.
Failing that
Are you able to scan at all?
Is your tuner configuration set up correctly?

[valioiv]

Thanks mate I have second box on the some dish and LNB which works ok i am not able to scan Tuner A (empty) nothing for scan

[00360362878]

is you your tuner set up exactly as your second box?

[chic.]

hi m8 try a dream elite image

[valioiv]

is you your tuner set up exactly as your second box?

yes it does

[valioiv]

hi m8 try a dream elite image

It was my first image dream elite 1.33d V3, phoenix edition SSL82

[00360362878]

yes it does

We are referring to the tuner config, I don't mean the way plugged in your new tuner.
After that you may have some problem on the main board maybe capacitors or something??

[valioiv]

We are referring to the tuner config, I don't mean the way plugged in your new tuner.
After that you may have some problem on the main board maybe capacitors or something??

I am sure the board is ok .The first image which i flashed was whit no tuner connected just to remove any damage on board. I was tray the new tuner on my other box it works whit no any config.

[valioiv]

Everything happened when the box lost SNR 46% cos of bad whether,then freeze.

[00360362878]

have you tried the faulty box in your other position, to eliminate any cable issues??

[valioiv]

have you tried the faulty box in your other position, to eliminate any cable issues??

Yes I did.I bouth new box it works ok on the some line. I thing its Software

[valioiv]

Is it possible to be the SIM???