DM800 -don't start

[Joke_r]

I did a flash via web browser and now the box get stuck on message DREAM multimedia (logo)

Press and hold power button while replug the power connector don't work, i can't go further...

Any suggestion ???

[.: JaCkPoT :.]

Reflash receiver with dreamup something

[firestorm]

is your box a clone ? if it is make sure you have a image with a clone friendly boot loader

[kevin64]

do you not what boot loader your box came with if so just flash a boot loader with dreamup use null moden cable only takes a few minutes to flash a boot loader then reboot the box image should work

[dctyper]

flash one of these matey Digital Kaos - Downloads - 2nd stage and force flash

[Joke_r]

Thanks, problem solved with dreamup and a null cable...

The boat loader installed on DM800 was 2nd stage #65 (or something) and the nabilosat 0.12 apparently needs to have 2nd stage #72

I had to install the boat loaders in sequence order until #72

Thanks for the help

[stecra]

help please flahed wont boot up

Hi think i have same problem as joke r but cant get my usb serial too work havent got the driver for it any more any help would be good i can still flash image over the web but freez at 2 emigma on booting up.

[dctyper]

people do have issues with usb to null, i suggest a proper null cable

[Superman]

Yes often usb-null can cause serval problems, best bet is to get a Null cable, and if you havn't got a section on your Pci get a PCI-RS232 card instead of USB-Null.

Super