DM800 wont connect to dreamup

[piptaps]

I mistakenly flashed an original image into my clone dm800. The original image is Gemini 4.5.

My problem is that the box won't connect to DreamUp. Both lights at the front are on (the red and the green), but it is strange I cannot connect from my pc to the box. When I click the Flash-button and connect the AC, the box don't return any signal, and the connection stops where it says "connection prepared, please switch on the Dreambox". It won't go any further than that.

I hope I haven't done anything wrong, but can anyone shed some light as to what I can do? All help most appreciated. I've spent a few nights trying to sort it, but I can't find anything on the net that helps. Thanks!

I tried to use network by inputting box IP and PC IP but still no luck.

[piptaps]

Im getting this error

DM 800 " error, no CA found"

[Lanzabauf]

Hallo, i have the same problem.....i tryed diffrent dreamUp versions... sometimes he start and sometimes not....need help too

[Lanzabauf]

read this and try......i work now on it

http://www.digital-kaos.co.uk/forums/f39/ca-not-found-60767/

[kevin64]

try and use this Digital Kaos - Downloads - dreambox enforcer


see if it help the dreambox to flash

[piptaps]

Thanks guys. I used dreambox enforcer to flash nabilo pure flash with bootloader 69.

The box will not boot now. After powering up it boots for a minute then hangs. I tried flashing different images with different bootloaders via web browser but they all freeze after 30 seconds of booting up.

Whats needs to be done here?

Box was working great for 2 weeks now and last night it just went dead

[Lanzabauf]

dreamUp1.3.3.4 works + gemini4.6 bl 72 for clone
i got it.....

[tolpo]

Hallo, i have the same problem whith dm600 clone , can I use the same procedure ?
Thank you !

[kevin64]

yes go to down loads at the top of page look for the dreambox downloads and get dreamup use a null modon cable to connect to dm and reflash the image you want on it make shore you use clone image if you have a clone donot use gemani as they bomb boxs

[jamesoates]

i did the same thing and now my dreambox is also dead. i can't get it to boot up

[nwaf05]

Thanks very much

[abualferas]

Thanks alot

[abualferas]

i have same problem with dm 800 but it bootup and no counication with dreamup and no ip can be seen
after bootingup it frees on 3:03

[alec]

I have read reports that if Dreamup will not connect, people who have another box that works temporary connect it up for Dreamup to do the checks, then switch it to the faulty box. I appreciate that if you have not got another box, than this is not possible.

[abualferas]

I have read reports that if Dreamup will not connect, people who have another box that works temporary connect it up for Dreamup to do the checks, then switch it to the faulty box. I appreciate that if you have not got another box, than this is not possible.

dreamup work nice with dm600 but not with dm800 I get the file to big