dm800 boot issue after unplugging

[akader]

Hi all,
Last week, I started to have the "error, no CAfound" or "error!" message.

I then flashed, applied secondtage 69, blackhole v0.11 for clones, evrything went fine.

But after shutdown (power unplugged the dm at night) when starting up the morning i still have the "error! " message on the panel, as soon as i flash the dm with dreamup (secondstage 69) i can then boot up again.

A strange thing i noticed is that when using the " ipkg list | grep secondstage" command, the result is " secondstage 73 r0.

Any idea, is that the issue i have ? Should i uninstall the 73 pkg and install the 69 (and where can i find the 69 ipk) ?


Thanks

[dctyper]

how do you shut the box down?

[akader]

Hello,
Thanks for your reply. I first use "nabilo shutdown" from the panel and later unplug the dm800.

Another light difference i saw is that initially i was using bh v0.5 and can see the mesg "it's now safe to unplug the dm", now with bh v0.11 it seems to be no longer visible.

BR.

[dctyper]

instal v12 mate. it has it and its safe

[akader]

hello dctyper,
thanks, any link for the v12 ? found only the v11.

BR.

[dctyper]

http://www.digital-kaos.co.uk/forums/f39/my-glitchy-hd-fix-800hd-74927/

[akader]

Just tried, now getting the "no ca found " error message. I downloaded the v12 from the link provided. One question, the image is for bl70 or above, can i still flash on a dreambox with bl69 ?

Thanks

[dctyper]

yes, just load bl 69 after. you will find them here Digital Kaos - Downloads - 2nd stage and force flash

[akader]

Hi dctyper,
Tried twice, the flashing went fine but dm800 keeps on rebooting (applied v12 then bl69).
just put back v11... going to sleep

thanks for your support

[akader]

Hum,
going crazy, yesterday i flashed the dm800 with blackhole v11 for clone, ss69, it went all fine. I switched it off later and unplugged the power.

This morning i have the " dream multimedia, error ? " message shown on the front panel. Any suggestion ?

regards,