Flashing DM800 problem!

[reloaded]

Guys

im desperately looking for some advice!

Iiv just tried flashing my dm800 with dreamup V1.3.3.4, as
it stuck on the ''dreambox mulimedia''

once i reach the stage where it says, connection established
please power up dreambox, the following error message is displayed...''IS NOT A VALID INTEGER VALUE''

what does this mean, and what im i doing wrong?

i have a clone dm800 with bl72...

can someone please help me out?

thanks in advance!

[kevin64]

hi
what you have to do
1-run dreamup , connect DM800 with cable
2- under dreamop select network and in the remote ip (box) put the ip you want for your box
3-now switch on the dreambox, dreamup will prepared the box for flash
when ready for flash
4 take the remote ip (box) then follow the procedure through the web now
192,168.xxxx.xxx
will get to the upgrade firmware page

This will force the box on bootloader mode

I hope this will help

[westkill]

not 100% sure
this version worked for me on a clone i think

[reloaded]

kevin

does this mean my pc will have to be connected to the net aswell???

at the moment its not, as its a very old pc...

can i randomly choose an ip address for teh box?

sorry to sound really silly mate...its the first time im doing this!

[kevin64]

only need dm on net yes you can name your ip only if you do the way i said other wise dm will pick ip for you 192.168 +++ +++

[reloaded]

westkill

iv tried that version still the same old message

''IS NOT A VALID INTEGER VALUE''

keeps popping up...

[westkill]

have you tryed dreamup with network unticked with null modem cable

[reloaded]

yes i have, westkill

im gonna try wat kevin has already told me....

see if i can get it to work...

its so frustrating, honestly...

[westkill]

yea m8 just reread what kevin said properly
thats worked for me before as well with a clone

[kevin64]

TRY THE

Digital Kaos - Downloads - dreambox enforcer

read file in there
click connect, a status massage will be displayed saying the connections prepared now switch on the Dreambox.Do this by either switching back on the power at the plug socket or putting the power cord back into the power socket at the rear of your Dreambox.

DONOT put power to dm before you have prepared connect

[reloaded]

Kev

tried the enforcer mate, but now i keep getting ''file too big''
when i select flash to upload the nabilo image....

is my box knackered?

only had it for 2 days!

[reloaded]

Kev

u are an absolute star!

followed what you said about the first solution...
about establishing a connection via the null modem cable
and then flashing it via the web portal......it worked perfectly!

got my nabilo image installed, and now just playing around with some settings...

thanks to westkill as well!

speak again...soon!

[Hell-o]

Yes man you are a really star and the only that have explain the real guide thank you very very much

[issam]

Yes man you are a really star and the only that have explain the real guide thank you very very much

TRY THE

Digital Kaos - Downloads - dreambox enforcer

read file in there
click connect, a status massage will be displayed saying the connections prepared now switch on the Dreambox.Do this by either switching back on the power at the plug socket or putting the power cord back into the power socket at the rear of your Dreambox.

DONOT put power to dm before you have prepared connect

thanks a lot

[flagooner]

Hi please help me I am completely new to this I have read everthing I could about flashing a Dreambox 800 and when I try to flash I get the same problem as Reloaded ie " is not a valid integar value" I don't undrestamd Kevin's instructions clearly I am an idiot but which cable do I connect to the DM800? and select IP is not available.Please can someone help me, thank you