Flashing DM800 problem!

[boogie]

have you checked the sim make sure it is in properly, if so remove sim see if it does the same..

tried that bubbles.afaik it isnt fried but how can i test it?
if its not that then what else could it be.as others have said the box only shows DREAMBOX MULTIMEDIA And nowt else....
aaaargh!


(furthermore - on a side note - im thinking upgrade to ferrari sim you lot been talking about for weeks.but cant find anywhere)

[bubbles69]

Depends if the box does the same thing with sim in and out, it will just be try and error changing the sim, but you need to find out what make processor you have if buying the sim201

[toto2]

same shit "s not a valid integer"

Ive triing all the dreamup version

[zeubest]

Hi, i'm also stuck with the "is not a valid integrer value

Can't figure how to solve it.

Any ideas ?

Yks.

[zeubest]

Problem found :

DreamUp , with certain dreamboxes, needs to have the IP fields filled, even if you don't use your network to flash.
So, I was using a "dummy" pc to flash, not connected, and I simply had to connect it to make DreamUp work normally, without "is not a valid integer value ...

[zenzen555]

Same problem

Hi,
I have the same problem,
when i connect my DM800 with connect modem i have 'is... integer'
I forced It with openpli image, the result is "too big file"

Can you help me, i need the process and a good image.

Thanks

[mnmnmn111]

it is a very good discussion i have understand everything about flashing thnx duds

[manu99]

hi
what you have to do
1-run dreamup , connect DM800 with cable
2- under dreamop select network and in the remote ip (box) put the ip you want for your box
3-now switch on the dreambox, dreamup will prepared the box for flash
when ready for flash
4 take the remote ip (box) then follow the procedure through the web now
192,168.xxxx.xxx
will get to the upgrade firmware page

This will force the box on bootloader mode

I hope this will help

Hi Kevin,
wat does it means if your db is not rocognized by dreamup??
i connect pc to db with null cable, press connect, then power the db n nothing happens!!!
please help

[kaisun]

I faced the same issue. I removed the lan card from the computer and the problem was resolved. I don't know why but it works for me. First, I tried disable the lan card but it did not work.

[gspeedy]

I had same. but for some reason even when using null com port and use network unticked u still have to plug e-net calble to laptop.
hope this helps someone out..

[slavenjovic]

Stucked with DREAM UP and " is not a valid integer value

Stucked with DREAM UP and " is not a valid integer value
Is there any solution? Please help.

I installed the wrong image to my dreambox 800hd clone and trying to solve his with dream up v2009, patched by forhike and natas. I get this message: " is not a valid integer value

[thawab]

I have the same problem

I foolishly flashed my genuine DM800 with clone image and now have 'ERROR: NO SIM2xx FOUND".
I will try all remedies above and let you know if I succeed.

Thanks to all in advance

[smirnoff_rules]

u sure its not the other way around ? wot did u pay for your dm800 ? not many spend 3 to 4 hundred on these

[thawab]

WOW

Yes mine is genuine. I bought it two years ago. It did cost me close to $400.
And yes your solution here, worked for me.
Thanks to Kevin and all who participated with helpful clues as they try and come back with their findings.

Guys, your all are awesome. Thanks a million.

[waj_uk]

i have the same problem but mine is a clone, i have tried a few dreamups none work the only one that did anything was a forhike and natas patched and when connected it says uploading flash loader and once that is complete it is stuck on "upload complete waiting for acknowledge" what do i do now? dreambox just displays dream multimedia with the red light on
if i disconnect and reconnect goes back to the no sim2xx found error
please help me get it back up and running