If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
is it a clone or original dm800
what sort of setup you got ?
fixed dish , motorised dish setup , etc
give a little more info and should get your box sorted out
dm800-s=1.1 m triax motorised dish=titanium twin lnb
DIGITAL KAOS BEST SITE ON THE NET
please use the thanks button if someone has helped
probally have to flash a new image/firmware to the box
if you havnt done all ready
like this one Digital Kaos - Downloads - Nabilosat Enigma2 Black Hole - DM800 v0.12
then once that sorted
goto menu>setup>servive searching>tuner configeration>configeration mode>simple>
then i think on mode scroll right with the remote to A/B/C/Ddiseqc
then scroll left or right on port A B AND C to your sats
press ok to save
then go to manual scan pick each of your sats to scan
or automatic scan will scan all three which will take a while
this is of top of me head
dm800-s=1.1 m triax motorised dish=titanium twin lnb
DIGITAL KAOS BEST SITE ON THE NET
please use the thanks button if someone has helped
Comment