Dm800 Changing Tuner ???? ANy tutorials ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • styla
    Top Poster +
    • Nov 2008
    • 223

    #1

    Dm800 Changing Tuner ???? ANy tutorials ?

    Hey guys

    I was thinking about changing my tuner on my DM800HD BL72 as i was getting the glitching problem on sky sports 1 HD etc...

    From what it seems like the tuners are plu n play and its all a matter of taking it out just like a computer grafix card and fitting the new tuner in?

    Am i correct?
    Or have i missed something?

    Thanks guys

    Best wishes

    Styla
  • the rock
    Top Poster +
    • Dec 2009
    • 217

    #2
    remove all the screws to take of the top panel then remove the rs232screws and the dvi port srcews and remove the back panel please be care full you did not miss a screw they are really not plug and play i have done this to get the tuner out with doubt any damage remove the back panel

    Comment

    • deffc0n
      DK Veteran
      • Aug 2009
      • 894

      #3
      Only remove top panel and back side

      Comment

      • g33za
        Newbie
        • May 2008
        • 11

        #4
        This should help unfortunately in german:
        hxxp://www.youtube.com/watch?v=IYgD3eu530A

        Comment

        • gordons
          Newbie
          • Nov 2010
          • 14

          #5
          very simple procedure,- just remove all screws from back panel except for rs232 port and 2 screws at each side of the box. Then its just a matter of pulling tuner to the right and replace. Make sure you put in a revision M tuner.
          Last edited by gordons; 8 December, 2010, 09:25.

          Comment

          Working...