Can not flash DM800 in the Browser

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zander1
    Junior Member
    • May 2010
    • 28

    #1

    Can not flash DM800 in the Browser

    Hi Guys new to the sat scene been following a thread about how to flash DM800 with the browser i can connect ok to the dreambox web control but I cannot see the firmware upgrade
    button at the bottom of the page can anyone help me out on this.

    Also I have motorized diseqc 1.2 but I cannot send it back to 0
    when I send the command to the dish it doesnt move it to 0.

    If anyone could give me some advice on this that would be great
    thanks.
  • Bulld0g
    V.I.P. Member
    • Apr 2008
    • 7158

    #2
    Try a different browser, works in firefox and ie for me.

    THE TRUTH
    The Hillsborough Independent Panel. 12/09/12

    Today's report is black and white.The Liverpool fans were not the cause of the disaster.
    The panel has quite simply found 'no evidence' in support of allegations of 'exceptional levels of drunkenness, ticketlessness or violence among Liverpool fans' and 'no evidence that fans had conspired to arrive late at the stadium' and 'no evidence that they stole from the dead and dying'.

    Comment

    • zander1
      Junior Member
      • May 2010
      • 28

      #3
      I can get into it from the browser the firmware upgrade button is not there

      Comment

      • southpaw
        V.I.P. Member
        • Dec 2009
        • 2233

        #4
        to put your box in flash mode you need to press the on/off button on dm800 whilst applying power / inserting plug . keep it pressed until display reads something like http mode 192.168.2.4 or whatever , then take this number to address bar in web browser and flashing mode will be within mate

        Comment

        • zander1
          Junior Member
          • May 2010
          • 28

          #5
          Thanks southpaw that worked a treat mate cheers.

          Comment

          Working...