smargo reader with newcs 1.67/cccam 2.1.3

[neo1]

hi is it possible to set this card reader with newcs 1.67/cccam2.1.3 on a dm800 clone having trouble setting it up. i have turned smargo reader on in kernal moduals and have set the reader to dreambox mode and autoswitch is there anything else i need to do thanks

[Nev1337]

yes its possible try with gemini image its pretty easier

[neo1]

yes its possible try with gemini image its pretty easier

hi i thought gemini was risky on a clone thanks. im using dream elite black hole v 1.0 do

[neo1]

hi is it possible to set this card reader with newcs 1.67/cccam2.1.3 on a dm800 clone having trouble setting it up. i have turned smargo reader on in kernal moduals and have set the reader to dreambox mode and autoswitch is there anything else i need to do thanks

hi can anyone give me some more info on how to get this working with this setup as i still cant get it to work. i was reading about instaling drivers in the box if that sounds right? any help please

[tomthebomb1968]

Hi, any special reason your running NewCs and CCcam? I run this setup myself but Im using ubuntu pc with omnikey readers and they dont work with CCcam.

For you you can just use CCcam if smargo is in 800 clone. Just set up your cfg to use the smargo.

the cfg file that works with dream elite 13

SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY : /dev/ttyUSB0 3530000
BOXKEY : /dev/ttyUSB0 13 xx xx xx
SMARTCARD SID ASSIGN : /dev/ttyUSB

[neo1]

Hi, any special reason your running NewCs and CCcam? I run this setup myself but Im using ubuntu pc with omnikey readers and they dont work with CCcam.

For you you can just use CCcam if smargo is in 800 clone. Just set up your cfg to use the smargo.

the cfg file that works with dream elite 13

SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY : /dev/ttyUSB0 3530000
BOXKEY : /dev/ttyUSB0 13 xx xx xx
SMARTCARD SID ASSIGN : /dev/ttyUSB

hi i use newcs because of when all the cards died using cccam i heard newcs was better thanks. i might just get a omhikey reader if it is easier to work with newcs

[Dreamer001]

Hi, with this telnet commands on the box you can see if smargo is been recognized.

dmesg|grep usb
find /dev/usb

The first is for the newer images an you get something like this:

/etc/tuxbox/config$ dmesg | grep usb
usbcore: registered new driver usbfs
usbcore: registered new driver hub
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
usb usb1: configuration #1 chosen from 1 choice
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
usb usb2: configuration #1 chosen from 1 choice
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
usb usb3: configuration #1 chosen from 1 choice
usb 2-1: new full speed USB device using brcm-ohci-0 and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1.2: new full speed USB device using brcm-ohci-0 and address 3
usb 2-1.2: configuration #1 chosen from 1 choice
usb 2-1.4: new full speed USB device using brcm-ohci-0 and address 4
usb 2-1.4: not running at top speed; connect to a high speed hub
usb 2-1.4: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
ftdi_sio: Unknown symbol usb_serial_port_softint
ftdi_sio: Unknown symbol usb_serial_disconnect
ftdi_sio: Unknown symbol usb_serial_probe
ftdi_sio: Unknown symbol usb_serial_register
ftdi_sio: Unknown symbol usb_serial_deregister
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 2-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
usbcore: registered new driver rt73
usbcore: registered new driver zd1211b
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver

And that is the right USB port for the config (ttyUSB0)

[Nev1337]

i use only gemini for my clone boxes and up to now no problem, there no time bomb editions etc...