My fix for No CA Error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cyberdad
    Newbie
    • May 2010
    • 4
    #1

    My fix for No CA Error

    Hello I just wanted to share with you my solution to No CA error.

    I had to change these settings in device manager > COM1 in order for dreamup to work with my DB800. It could not connect with any other settings

    bits per second:115200
    Data bits: 8
    Parity: None
    Stop bits: 1
    Flow Control: Xon/X off

    I hope this will help anyone who cannot make dreamup to connect with the box
    Tags: dreamup, no ca error
    • SGTFlipFlop
      V.I.P. Member
      • Sep 2009
      • 1002
      #2
      Why do you want to use DreamUp with a DM800?

      Flash via the webpanel as its far easier

        Comment

        • Bulld0g
          V.I.P. Member
          • Apr 2008
          • 7158
          #3
          Originally posted by SGTFlipFlop
          Why do you want to use DreamUp with a DM800?

          Flash via the webpanel as its far easier
          If you get the error ca not found, you have to use dreamup to get to the web interface

          THE TRUTH
          The Hillsborough Independent Panel. 12/09/12
          Today's report is black and white.The Liverpool fans were not the cause of the disaster.
          The panel has quite simply found 'no evidence' in support of allegations of 'exceptional levels of drunkenness, ticketlessness or violence among Liverpool fans' and 'no evidence that fans had conspired to arrive late at the stadium' and 'no evidence that they stole from the dead and dying'.

            Comment

            • SGTFlipFlop
              V.I.P. Member
              • Sep 2009
              • 1002
              #4
              Originally posted by Bulld0g
              If you get the error ca not found, you have to use dreamup to get to the web interface

              Ah, Didn't know that

                Comment

                Previous template Next
                Working...