my own fault

[vmd1916]

my own fault,,well lads was messing with my dm800 av/ hdmi settings and when i change to either on tv i am not getting any signal,so i rebooted hoping av would kick in,then i disconnected hdmi to try to get av working ,no good have put on another tv with different av lead ,nothing
box is working ok cause i can see channels change in display,
so basicaly i cant get in to menu to do factory reset as i can see nothing on tvs,, can i do a factory reset through my pc ,and what program has this ,, i tested ip connection on box no problems,,

[junger]

put a scart lead in temporarily until you re-select hmmi

[vmd1916]

i have taken off hdmi cable ,and put on scart lead still nothing ,and i tried with different scart lead on different tv,,nothing i cant reselect anything cause i cant see anything,,help

[.: JaCkPoT :.]

i have taken off hdmi cable ,and put on scart lead still nothing ,and i tried with different scart lead on different tv,,nothing i cant reselect anything cause i cant see anything,,help

You can see all menus and use a virtual remote from the DM webinterface

[vmd1916]

all done jackpot ,ta very much,,,