Manual access to menu tm5300

[radders58]

Hi all,
Is it possible to get into the menu via the receiver,my mate has somehow changed settings for remote so cant do anything with it.
Have to change channels manually.
Cheers

[thijs]

did you try pressing exit three times on the remote
this should bring it back to original mode while aiming at the reciever.

[dick b]

once you have got into the menu its system settings>password setting>remote controller,you can toggle between type 1 & 2.
failing that do a forced download of the patch or official S/W you are using to see if that clears it
PS.check the handset batteries 1st!

[radders58]

did you try pressing exit three times on the remote
this should bring it back to original mode while aiming at the reciever.

tried that,It didnt work but thanks.

[radders58]

once you have got into the menu its system settings>password setting>remote controller,you can toggle between type 1 & 2.
failing that do a forced download of the patch or official S/W you are using to see if that clears it
PS.check the handset batteries 1st!

Thanks Dick,will try that when I get a null cable.

[thijs]

Try this
when your reciever is on turn it of at the back now while holding the menu button switch it back on this will bring you in the loader menu you could reload firmware with your usb here
i don't know if this will reset the remote control but it's worth a go or you could do a factory reset this will reset the remote controle setting but you will loose your channel list but if you have a back up of this it will be no problem for you