OAP Needs Help

[Plumbob 1947]

Hi guys,
I have set up a motorised system many yrs ago in the days of D2Mac on 1deg west..
So not quite a newbee to sat, this time i have put a 1mtr dish looking at 13/19/28 degrees 3lnb of course, and intend to fit 60cm dish for 39deg.

Now to where i need help, i have bought a tm5400super, now realise should have got the hd version, but can change when i have some more dosh,,,HOW do i use the embeded conax, and soft cam on this box..Please dont say read the stickys i have on this and other forums and am now confused and dont want to screw up my new box..
thanks in advace for any help mal

[dick b]

right patching and softcams are still in use for your box but for how much longer is anybodies guess.
to use the latest softcam you must patch the box 1st.
download patch and softcam and unzip both load the patch into the box 1st.
if using USB format a usb stick to fat32 put in your computer locate the unzipped patch and softcam and copy to the stick.
put stick in the TM5400 press usb on the handset and scroll to data transfer>OK highlight the patch>OK wait for patch to load and stb to reboot.then go back to data transfer highlight the softcam>OK.
I"m also sending a loader for loading via the rs232 port.I prefer this method for patching as its more reliable.to do it this way connect your box via its rs232 port to the rs232 port on your computer, download and unzip loader,open loader browse for and click on and open the unzipped patch click on connect.wait for patch to load and box reboot.you can load softcams this way too just click on the "keys"tab at the top of the loader.I"ve also sent the instructions for a forced download if you get any problems. any questions just ask someone will have an answer.
PS open softcam with "notepad"to see whats available on 39E,19E 4.8E etc;