not connecting

[dick b]

not quite sure what you mean in your last post,But if you are on a motorised dish its not advisable to alter skew(twist) of the lnb leave it at "0".you should get the the following Transponders no problem with just about equal high quality 11.052V 30000 & 12.524H 30000 they both have FTA channels on and you should get good clear pictures on both,if not its an alignment problem.

If in fact you have a fixed dish and have been moving it manually you need approx 25 degrees of skew for bulsat,thats anti-clockwise when looking from behind the dish

[johnwilliam1]

not quite sure what you mean in your last post,But if you are on a motorised dish its not advisable to alter skew(twist) of the lnb leave it at "0".you should get the the following Transponders no problem with just about equal high quality 11.052V 30000 & 12.524H 30000 they both have FTA channels on and you should get good clear pictures on both,if not its an alignment problem.

If in fact you have a fixed dish and have been moving it manually you need approx 25 degrees of skew for bulsat,thats anti-clockwise when looking from behind the dish

sorry i had been speaking to someone else, anyhow i do have a fixed dish but i have the lnb twisted to the left hand side of the dish on the verticals where i think the lnb should be twisted to the right hand side of the dish on the horizontols and possibly thats were i have been going wrong as far as trying to get the picture on the 5400, on a nice evening or decent evening i am going to tweek the lnb right round to where it should be, i think it has been a mistake by me

[Manic01]

You leave the lnb skewed in position for v+h you dont change.