TM5302 Wont boot up

[kenny_c]

I have got in from work and my box wont boot up, its new, and now has no signal to the tv, the digital display on the front is just going round and round like its loading for ages.

any one got any ideas what i can do to get it to work? as at the minute i cant do anything.

It was working yesterday and i havent done anything to it

[digicon]

There is a Hard RESET for every make of TM receiver, I got a 5302 for a mate and had the same problem when i was trying it out the box froze and would not operate. I just rang TM Technical and one of the Guys there will talk you through the Hard reset procedure.

It involves some of the front panel buttons but for the life of me i cant remember it.

[Manic01]

1-turn off from rear and disconnect LAN cable
2-hold stand by button in the front panel at the same time turn on from rear and wait
3-you will see loader menu scrawl down to factory reset then press stand by button
this should fix it,
go to quit press stanby button to exit

[thijs]

1-turn off from rear and disconnect LAN cable
2-hold stand by button in the front panel at the same time turn on from rear and wait
3-you will see loader menu scrawl down to factory reset then press stand by button
this should fix it,
go to quit press stanby button to exit

i think you mean menu button on step2 m8

[kenny_c]

thanks for the advice.

none of the above worked, had to call the help line and they told me i need an rs232 cable and reinstall the image