28.2? East Channel List for TM5402, BM7000s, DrHD F15/D15

[tony_i]

Just done the full reboot, I can now get now and next but no 7 day guide.

Do you have a hard drive plugged in?

[tony_i]

Just done the full reboot, I can now get now and next but no 7 day guide.

Do you have a hard drive plugged in?

[po37]

No hard drive but a USB stick

[tony_i]

No hard drive but a USB stick

That should be okay, but when I've had trouble with the 7-day EPG in the past it's been hdd-related.

[po37]

i'm using phantompatch 1.36p is that still the latest out there?

think i will try reloading it or put newer firmware on if there is any newer

[tony_i]

i'm using phantompatch 1.36p is that still the latest out there?

think i will try reloading it or put newer firmware on if there is any newer

I don't know anything about the TMs' firmware.

If I were you I'd try another hdd before doing anything else. It's worked for me in the past.

[po37]

will give it a go thanks.

[happy_highlander]

The hdd/usb stick should not effect the epg as it is written directly to the box's Flash. Try going to menu then factory reset and delete all channels then reboot box. Now reload channel list it will start on epg channel do just pass the epg button and leave it to see what happens

[po37]

Ended up deleting all channels and installing them again, had to do it twice though. All seems to be working now fingers crossed.

[happy_highlander]

The post above yours gives the correct procedure for channel list installation. You should never just over write as it causes epg errors as you have found out

[Marmite123]

Hi Guys ! First of all thanks for the list ! One thing though, I can't seem to view many channels in the HD list ? I just get no or bad signal or it says it's moving to 28.2 Eurobird. Maybe it's something i'm doing wrong ? Any ideas ?

[happy_highlander]

Follow the installation instruction in post 339. That should sort it unless of course all the hd channels have changed since I left for work this morning.

[Marmite123]

OK, after following the instructions in post 339 this didn't work :/ ! So I reset my box, installed 9991 firmware, and then installed the channel list again. still no joy !

This is now starting to drive me to distraction, I can get all sly sports in HD and SD
I can only get one sly movie channel in HD the rest are no or bad signal or it says it's moving to Astra/ Eurobird etc etc !

I have literally checked everything else and all seems fine, and i've just ran out of ideas trying to get all the HD channels back.

Can anybody suggest anything else for me to try ?

Many thanks !

[digicon]

I am just wondering why your using a fixed dish channel list for 28.2? east when it appears you have a motorised system due to your reports about the no or bad signal and its saying its moving to Astra/Eurobird.

Have you checked your settings in the configuration menu

[happy_highlander]

That's the on screen message that was broadcasting when selecting a channel that had moved to the new sat a few months back. So I can only assume an old channel list is being used