m2 card re-programme

[alker ranger]

can someone please give me step by step guide as to re programme my m2 card, i have a cas3 and when i try to write the card i get a error 13 message. Thanks:

[benny/9]

can someone please give me step by step guide as to re programme my m2 card, i have a cas3 and when i try to write the card i get a error 13 message. Thanks:

*************************************
Your cas3 will need to be connected to your PC using both USB and Serial cable.
Start up your CIS 8.6C Their should be a shortcut on your Desktop
Click on the Utilities tab, and click the phoenix icon, select Phoenix 3.579 Mhz, then select hide.
Insert your card into your programmer.[chip down]
Start up the MII+ update file you downloaded and start up M2p13.exe Click Open, Select Com Port, Connect, Clear & reset OS and once complete click Download Application.

[alker ranger]

will give it a go 1st time at this so here goes cheers.

[.: JaCkPoT :.]

hasnt support for this card stopped??

[benny/9]

M2 Plus Update 26/02/09
******************
new Update : Digitalb

[.: JaCkPoT :.]

Sigh of relief for some..cheers again dave

[alker ranger]

Thanks Benny, i need a serial cable getting 1 today no doubt will need help later cheers

[davidcoldicutt]

Is this the same M2 card?

Is this the same M2 card that I used years ago? I thought it had become an ice scraper yonks ago. I used to get updates from STOPSTOP. Surely it can't still be working. Can it?

[benny/9]

Is this the same M2 card that I used years ago? I thought it had become an ice scraper yonks ago. I used to get updates from STOPSTOP. Surely it can't still be working. Can it?

**************************************************
if you still have the card test the file it opens digialb on 16e
and canal+nordic on 1w

[alker ranger]

Cheers Benny, Programmed card with attached file easy peasy, also programmed diablo cam with latest underworld file gettin good at this learning all the time thanks for all your help.