Technomate 7102HD No Signal BBC HD

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Teckltd
    Newbie
    • Dec 2008
    • 7
    #1

    Technomate 7102HD No Signal BBC HD

    Hi I have a 7102HD around 3 months old that I have patched with Phantompatch 122.
    I have only just realised that although BBC HD and BBC ONE HD are seen on 28.2, when I select either of them I get the message "No or Bad Signal".
    I have rescanned three times now with the same result, a scan sees the channels and lists them but, the above message appears when I select the channel.
    Any help/advice would be very much appreciated.
    Thanks Keith
    Tags: None
    • Manic01
      Banned
      • Dec 2008
      • 5117
      #2
      Try this transponder.
      10847 V 23000
      Make sure channel list is not full.

        Comment

        • Teckltd
          Newbie
          • Dec 2008
          • 7
          #3
          Hey thanks for the help. I have now carried out a Blind Scan and can now get BBC HD and all the Olympic HD Channels but, BBC ONE HD now says No Audio/Video instead of Bad or No Signal.
          Getting there slowly.

            Comment

            • Nutsandbolts
              DK Veteran
              • Oct 2011
              • 1168
              #4
              Originally posted by Teckltd
              Hey thanks for the help. I have now carried out a Blind Scan and can now get BBC HD and all the Olympic HD Channels but, BBC ONE HD now says No Audio/Video instead of Bad or No Signal.
              Getting there slowly.
              Hi. To all the idiots who keep saying that blind scans are a waste of time take note.

              Regards

                Comment

                • Teckltd
                  Newbie
                  • Dec 2008
                  • 7
                  #5
                  A Blind Scan and correct APID and PPID codes did the job. BBC HD, BBC ONE HD, ITV ONE HD and all BBC Olympic HD channels working perfectly. This would not have happened without a Blind Scan.

                  Regards Keith

                    Comment

                    • thijs
                      DK Veteran
                      • Apr 2010
                      • 1096
                      #6
                      Originally posted by Teckltd
                      A Blind Scan and correct APID and PPID codes did the job. BBC HD, BBC ONE HD, ITV ONE HD and all BBC Olympic HD channels working perfectly. This would not have happened without a Blind Scan.

                      Regards Keith
                      yes it would have happened without a blindscan too if you enter the right frequecies and details blindscan will give you a lot off duplicates and channels you don't need or want.
                      Everything discussed on this forum is for experimental and educational purposes only. Use the information at your own risk.

                        Comment

                        • Brian Fowler
                          Newbie
                          • Oct 2012
                          • 1
                          #7
                          Failure to receive BBC HD after retune by BBC

                          Hi, I have exactly the same problem but the signal strength on 28E frequency 10.847 is red, not Blue/yellow and although I have tried different PID and the HD 8PSK modulation . A scan does not pick up BBC HD and BBCOne HD because the signal is too low.
                          Can some good person please list the correct VPID and APID and suggest what I can do with my TD 6900 HD receiver to get a good signal
                          Funnily I can get ITV HD picture but no audio the APID might be helpful
                          Thanks
                          Brian

                            Comment

                            • dick b
                              V.I.P. Member
                              • Jun 2009
                              • 2462
                              #8
                              Originally posted by Brian Fowler
                              Hi, I have exactly the same problem but the signal strength on 28E frequency 10.847 is red, not Blue/yellow and although I have tried different PID and the HD 8PSK modulation . A scan does not pick up BBC HD and BBCOne HD because the signal is too low.
                              Can some good person please list the correct VPID and APID and suggest what I can do with my TD 6900 HD receiver to get a good signal
                              Funnily I can get ITV HD picture but no audio the APID might be helpful
                              Thanks
                              Brian
                              read post #2 in the "BBC HD & BBC1 HD.how to update?" thread. PIDs can be obtained from flysat or the like.

                                Comment

                                Previous template Next
                                Working...