Technomate TM500 frozen on boot screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • m3mpower
    DK Veteran
    • Mar 2010
    • 425
    #1

    Technomate TM500 frozen on boot screen

    Hi guys
    I hope someone could point me in the right direction please.
    My brother has a Technomate TM500 that is frozen on boot screen, it won't go past the boot screen.
    He said the receiver was flashed before and it worked but the guy who did it is now not reachable.
    I would like to help him sort it.
    Can someone tell if this can be fixed? And how please?
    Thanks in advance
    Tags: None
    • DOUGALMCD
      V.I.P. Member
      • May 2011
      • 3229
      #2
      Try a reflash with mini web plenty of tuts around.

      Technomate software online

        Comment

        • m3mpower
          DK Veteran
          • Mar 2010
          • 425
          #3
          Originally posted by DOUGALMCD
          Try a reflash with mini web plenty of tuts around.

          Technomate software online
          Hi
          I checked your link.
          On the TM500 Linux, I can see there is 3 different update files, which one do I get?
          And do I flash, do I need a special cable for that, and which one please?
          Thank you

            Comment

            • DOUGALMCD
              V.I.P. Member
              • May 2011
              • 3229
              #4
              Hi check the downloads section under satellite page three there should be image and tut on mini web there. Hold power button on tm then switch on whilst still holding button you will then see last digits of ip on box. You can flash it via mini web.

                Comment

                • digicon
                  V.I.P. Member
                  • Jul 2009
                  • 8261
                  #5
                  Originally posted by m3mpower
                  Hi guys
                  I hope someone could point me in the right direction please.
                  My brother has a Technomate TM500 that is frozen on boot screen, it won't go past the boot screen.
                  He said the receiver was flashed before and it worked but the guy who did it is now not reachable.
                  I would like to help him sort it.
                  Can someone tell if this can be fixed? And how please?
                  Thanks in advance

                  It can be fixed but not by the Miniweb TUT for this you will need a null modem cable and the original software, The same thing happened to me and this was the only solution

                  Code:
                  http://www.technomatesoftware.co.uk/index.php?dir=Linux%20based%20receivers/Guides/&file=TM500-600%20serial%20update.pdf

                    Comment

                    • m3mpower
                      DK Veteran
                      • Mar 2010
                      • 425
                      #6
                      Originally posted by digicon
                      It can be fixed but not by the Miniweb TUT for this you will need a null modem cable and the original software, The same thing happened to me and this was the only solution

                      Code:
                      http://www.technomatesoftware.co.uk/index.php?dir=Linux%20based%20receivers/Guides/&file=TM500-600%20serial%20update.pdf
                      OK thanks
                      I will try that

                      Regards

                        Comment

                        Previous template Next
                        Working...